Alpine Comprehensive Guide for Installing and Removing the CDA 7892 CD Player
Page 39

Installation

Metal plate

Detachable

Front panel

Caution

When you install this unit in your car, do not remove the Detachable Front Panel.

If the Detachable Front Panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.

1

Mounting Sleeve

(Included)

Dashboard

CDA-7995/CDA-7894/CDA-7893/CDA-7892

Slide the mounting sleeve into the dashboard.

2

Screw

 

 

Hex Nut (M5)

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-7995/CDA-7894/CDA-7893/CDA-7892. Connect all other leads of the CDA-7995/CDA-7894/CDA- 7893/CDA-7892 according to details described in the CONNECTlONS section.

3

Lock Pin

Slide the CDA-7995/CDA-7894/CDA-7893/CDA-7892 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.

Removal

1Remove the DETACHABLE FRONT PANEL.

2Use a small screwdriver (or similar tool) to push the locking pins to the “up” position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

3Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

∗∗

Metal

 

Mounting

 

Strap

∗

Ground Lead

Chassis

Bolt Stud

CDA-7995/

CDA-7894/

CDA-7893/

CDA-7892

CDA-7995/ CDA-7894/ CDA-7893/ CDA-7892

Face Plate

Screws (M5 ⋅ 8) (Included)

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

NOTE

For the screw marked **, use an appropriate screw for the chosen mounting location.

Ground Lead

∗

Mounting Bracket

NOTE

Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

37-EN

Page 38 Page 40
Image 39
Page 38 Page 40
Contents CDA-7995/CDA-7894 Alpine CD Changers Give You More Contents Information Remote Control OperationMP3 Operation XM Radio OperationPrecautions Never Attempt the Following Basic Operation Setting Time Audio Mute FunctionDisplaying Time Setting the Bass Control Setting the Treble ControlAdjusting the built-in Crossover About the Time Correction Example 1. Listening Position Front Left SeatExample 2. Listening Position All Seats Bass Focus Example of Steps 2 and 3 SettingTime Difference Table Setting the MX ModeCDA-7995/CDA-7894 only Blackout Mode On and OffQuick Searching Function Changing the Audio Level Display PatternAbout Title and Text Displaying the Title/TextErasing Disc Title/Station Title Titling Discs/StationsDimmer Control Setup OperationSwitching the Tuner Mode Changing Lighting ColorSound Beep Guide Function Turning Mute Mode On/OffScroll Setting Setting the AUX Mode V-LinkConnecting to an External Amplifier Setting the Defeat of the External InputCDA-7894/CDA-7893/CDA-7892 only Adjusting Display Contrast DemonstrationCDA-7995 only Radio Operation Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsTuning to Preset Stations Automatic Memory of Station PresetsCD Player Operation Opening and Closing the Movable displayPlayback Music Sensor Skip Fast Forward and BackwardRepeat Play Controlling CD Changer Optional When a 12-disc CD Changer is connectedX. Random Play Scanning ProgramsMulti-Changer Selection MP3 Operation Playing MP3 FilesPlaying MP3 Files with the CD Changer Optional File Search Selecting FoldersAbout MP3 Setting the Range of MP3 File SelectionWhat is MP3? Playing MP3 DataTerminology XM Radio Operation Receiving XM Channels with the XM Receiver OptionalChecking the XM Radio ID Number Changing the Display Storing XM Channel PresetsReceiving Stored XM Channels Category SearchControls on Remote Control Remote Control OperationBattery Replacement Case of Difficulty InformationNo Magzine Antenna FM Tuner Section SpecificationsPrecautions Installation and ConnectionsRemoval Installation38-EN ConnectionsTo prevent external noise from entering the audio system Antenna Receptacle Power Antenna Lead BluePage ALPINE-1 Limited Warranty
Top Page Image Contents