Adjusting and Storing the Time Correction (Storing available on
Before performing the following procedures, refer to “About Time Correction” (page 21).
1 Press T.CORR/X-OVER to make time corrections.
Each press changes the mode as follows:
Bass Focus mode → Time Correction mode → normal mode
→Bass Focus mode
2 Press BAND/TEL. to select a speaker to be adjusted.
F – L → F – R → R – L → R – R → S – L → S – R → F – L
F – L → F – R → R – L → R – R → F – L
3 Turn the Rotary encoder to adjust the desired time correction value.
To store the adjusted contents
1)Press and hold any one of the preset buttons (1 through 6) for at least 2 seconds into which you wish to store the adjusted contents.
4 Repeat step 2 and 3 to set another speaker.
5 After setting, press and hold
•If no operation is performed in 15 seconds, the unit returns to normal mode.
Recalling the Stored Time Correction Settings
1 Press
Each press changes the mode as follows:
Bass Focus mode → Time Correction mode → Normal mode
→Bass Focus mode
2 Press the preset button (1 through 6) that has your desired time correction in memory.
3 Press and hold
•Time Correction mode is automatically cancelled if no operation is performed within 15 seconds.
Setting the MX Mode
MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise.
1 Press MX to select MX ON.
2 Press SOURCE/POWER to select the source to which you want to apply MX (Media Xpander).
3 Press and hold MX for at least 2 seconds to activate the level setting mode.
4 Turn the Rotary encoder to select your preferred level or OFF.
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and produces well balanced sound at all frequencies.
CD (MX level 1 to 3):
CD mode processes a large quantity of data. This data processing power takes advantage of CD quality sound sources.
MP3/WMA/DAB (MX level 1 to 3):
This corrects information that was lost at the time of compression. This reproduces a
DVD (Video CD) (MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(MUSIC MX level 1):
A DVD or Video CD contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.
AUX (MX level 1):
Choose the MX mode (MP3, MUSIC, or MOVIE) that corresponds to the media connected.
If two external devices are connected, a different MX mode for each media can be selected.
5 Press Rotary encoder to return to normal mode.
•To cancel MX mode for all music sources, press MX to turn MX off.
•MX mode is automatically cancelled if no operation is performed within 15 seconds.
•Each music source, such as radio, CD, and MP3/WMA can have its own MX setting.
•On disks with both MP3/WMA and
•Setting to MX OFF sets MX mode of each music source to OFF.
•This function is inoperable when DEFEAT is set to ON.
•MX mode does not function when MX is set to ON for MW, LW radio.
•If the unit is connected to an audio processor with the MX function, such as
•When entering RDS signals, the MX operation cannot be performed.