Alpine CDA-9813R Recalling Preset RDS Stations, Receiving RDS Regional Local Stations, 10-EN

Page 12

Recalling Preset RDS Stations

1 Press F/SETUP so that the “FUNC” indicator (only the underlined portion of the “FUNC” indicator for CDA-9811R) lights up.

2 Press 1/AF to activate the RDS mode.

3 Press F/SETUP to activate the normal mode. The “FUNC” indicator (only the underlined portion of the “FUNC” indicator for CDA-9811R) goes out.

4 Make sure that the “FUNC” indicator (only the underlined portion of the “FUNC” indicator for CDA-9811R) light goes out, then press the preset button in which your desired RDS station is preset.

If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list.

5 If the preset station and the stations in the AF list cannot be received:

When the PI SEEK setting is on (refer to “PI SEEK Setting” on this page), the unit searches again for a station in the PI (Programme Identification) list.

If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset no. disappears.

If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district.

•For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the FM1, FM2 and FM3 bands only.

Receiving RDS Regional (Local) Stations

1 Press and hold F/SETUP for at least 3 seconds to / activate the setting mode.

2 Press g or f to select the RDS REG (Regional) mode.

3 Press BAND/TEL. to turn on or off the RDS REG (Regional) mode.

In the RDS REG OFF mode, the unit automatically keeps receiving the related local RDS station.

4 Press F/SETUP to deactivate the setting mode.

PI SEEK Setting

1 Press and hold F/SETUP for at least 3 seconds.

2 Press g or f to select “PI SEEK”(CDA- 9811R:“PISK”).

3 Press BAND/TEL. to toggle the mode between “PI SEEK ON” (CDA-9811R:“PISK ON”) and “PI SEEK OFF” (CDA-9811R:“PISK OFF”).

4 Press F/SETUP to set the selected mode.

Receiving Traffic Information

1 Press T.INFO so that the underlined portion of the “T.INFO” indicator lights up. (Only the upper lined portion of the “T.INFO” indicator for CDA-9813R/ CDA-9812RX.)

2 Press g or f to select your desired traffic information station.

When a traffic information station is tuned in, the underlined portion of the “TP” indicator (only the upper lined portion of the “TP” indicator for CDA-9813R/CDA-9812RX) lights up.

Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows “TRF-INFO” for a few seconds and returns to the PS display.

When the traffic information broadcast is over, the unit will automatically set in the standby mode.

•If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the underlined portion of the “T.INFO” indicator blinks. (Only the upper lined portion of the “T.INFO” indicator for CDA-9813R/ CDA-9812RX.)

•If you do not want to listen to the traffic information being received, lightly press T.INFO to skip that traffic information message. The T.INFO mode will remain in the ON position to receive the next traffic information message.

•If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized.

•In the T.INFO mode, the SEEK tuning selects only the TP stations.

10-EN

Page 11 Page 13
Image 12
Page 11 Page 13
Contents CDA-9815RB CDA-9813R CDA-9812RB CDA-9812RR CHM-S630 CHA-S634 CHA-1214Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Getting Started Press DISP/B.OUT to switch the display pattern Detaching and Attaching the Front PanelManual Storing of Station Presets Automatic Memory of Station PresetsTuning to Preset Stations RadioSetting RDS Reception Mode and Receiving RDS Stations Press Search in Radio mode to switch to Title Search modeStation Title Search Function Quick Search FunctionRecalling Preset RDS Stations PI Seek SettingReceiving RDS Regional Local Stations Receiving Traffic InformationPTY Programme Type Tuning When traffic information stations cannot be receivedPress T.INFO to deactivate the Traffic Information mode Receiving Traffic Information While Playing CD or RadioPress 2/P.PTY to activate the Priority PTY mode again Priority PTY Programme TypeDisplaying Radio Text 12-ENPlayback 13-ENPress 5 in the play or pause mode Repeat PlayX. Random Play 14-ENFile Search mode Folder Search modeScanning Programmes Quick SearchTerminology 16-ENSound Setting Setting the Bass Control CDA-9812RX/CDA- 9811R onlyPress Rotary encoder repeatedly to choose the desired mode 17-ENSetting the Treble Control CDA-9812RX/CDA- 9811R only Setting the Bass Type CDA-9812RX/CDA- 9811R onlyEqualizer Presets CDA-9815RB/CDA-9813R only 18-EN19-EN WAY System 20-ENAbout Time Correction Example 1. Listening Position Front Left SeatExample 2. Listening Position All Seats 21-ENExample setting for steps 2 Press T.CORR/X-OVER to select the Bass Focus modeBass Focus 22-ENSetting the MX Mode Press BAND/TEL. to select a speaker to be adjustedPress Rotary encoder to return to normal mode 23-ENAbout the indicator display Other FunctionsDisplaying the Title/Text 24-ENBlackout Mode On and Off Titling Discs/StationsErasing Disc Title/Station Title 25-ENPersonalize About i-PersonalizeData Downloading 26-ENSound Customizing Visual Customizing27-EN External Device 28-ENUsing DAB Receiver for the Ensemble Seek Tuning Optional Changing the ServiceChanging the Service Component DAB OptionalMemorizing the Service Receiving the Memorized ServiceSelected service is received Memorizing the Ensemble AutomaticallySetting the Announcement Select Mode Changing the Display Mode31-EN Setting for Automatic Change from DAB to Setting ON/OFF for DRC Dynamic Range ControlDisplaying the Regional Label Receiving Announcement Information of DAB Local StationsTelephone Mode ON/OFF MobileHub Link OperationOptionalIncoming Calls About MobileHub LinkSMS Short Message Service Operation Calling by using the Speed DialCalling Calling by the address bookChanger Optional Controlling CD Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalRemote Control 36-ENInformation Case of DifficultyBasic RadioIndication for CD Player Indication for CD Changer38-EN Specifications Remote Control CDA-9815RB/CDA-9813R/CDA-9812RX only39-EN Bottom side of playerInstallation and Connections 40-ENInstallation 41-ENRemoval Connections for CDA-9812RX/CDA-9811R 42-EN43-EN To prevent noise/interference in the audio systemConnections for CDA-9815RB/CDA-9813R 44-ENAntenna Receptacle # System Switch 45-EN
Related manuals
Manual 48 pages 34.04 Kb
Top Page Image Contents