Calling
Calling by the address book
You can call up the address book registered in the portable telephone to call from.
1 Press and hold BAND/TEL. for at least 2 seconds.
2 Press SEARCH to select Phone Book mode.
A list in alphabetic order is displayed.
Retrieving an addressee by Alphabetic Sort List
3 When displaying the Alphabetic Sort List, turn the Rotary encoder or press g or f to select the addressee.
4 Press :/J or Rotary encoder to place a call.
5 Press BAND/TEL. to end the call.
Telephone mode will end and return to the original source mode.
Retrieving an addressee by Selecting Search
3 Press 8 or 9 to select an initial letter (A to Z) of the addressee.
4 Turn the Rotary encoder to select the addressee.
5 Press the Rotary encoder to place a call.
6 Press BAND/TEL. to end the call.
Telephone mode will end and return to the original source mode.
•If all telephone numbers and registered names cannot be displayed at once, press TITLE to show undisplayed numbers and names.
•“NO MEMORY” (“NO MEM” for
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone numbers registered in No. 1 to 9 of the address book.
1 Press and hold BAND/TEL. for at least 2 seconds.
2 Within 5 seconds, press and hold (for at least 2 seconds) a preset button (1 through 6) to place a call.
By pressing F/SETUP, and then pressing a preset button (1 through 3) for at least 2 seconds, you can place a call to the number registered in 7 to 9.
•You can place a call by pressing :/J after momentarily pressing the preset button (1 through 6) of the number you wish to call.
•You can place a call by pressing the Rotary encoder, after selecting a number which you wish to call, by pressing g or f , or by turning the Rotary encoder.
3 Press BAND/TEL. to end the call.
Telephone mode will end and return to the original source mode.
•If there is no telephone number registered to a preset button, “NO PRESET” (“NO
Calling by the outgoing/incoming/absent incoming history
You can place a call to any of the last 999 calls by the outgoing/ incoming/absent incoming history.
1 Press SEARCH in Phone Book mode to select the History mode.
2 Press 8 or 9 to select outgoing history (display example: “DIALED”), incoming history (display example: “RECEIVED” ), absent incoming history (display example: “MISSED”).
3 Turn the Rotary encoder, or press g or f to select the addressee from the outgoing or incoming history.
4 Press :/J or the Rotary encoder to place a call. 5 Press BAND/TEL. to end the call.
Telephone mode will end and return to the original source mode.
•If all telephone numbers and registered names cannot be displayed at once, press TITLE to show undisplayed numbers and names.
•“NO MEMORY” (“NO MEM” for
SMS (Short Message Service) Operation
You can be informed when you receive a short message.
Receiving a short message
1 When a text message is received, “NEW MESSAGE” for
The contents of the received message can only be read from the portable phone's display.
2 Press any one of the buttons on the unit to cancel the display. The buttons that are pressed will enter the mode or will be activated.