Alpine CDA-9813R, CDA-9812RR Memorizing the Service, Receiving the Memorized Service, 30-EN

Page 32

Memorizing the Service

1 Select the service that you want to memorize.

2 Press any one of the Preset buttons (1 through

6)for at least 2 seconds while the “FUNC” indicator (only underlined portion of the “FUNC” indicator for CDA-9811R) goes out. The selected service is memorized.

3 To memorize more, repeat the above steps 1 and 2.

•You can memorize up to 18 stations (6 stations for each band; DAB1, DAB2, DAB3).

•If you select a preset button that has already memorized a service, the new selection takes it over.

•When you are not receiving DAB, the service is not memorized. (Memorize the service when the DAB reception is good)

Receiving the Memorized Service

1 Press BAND/TEL. to select your desired band.

2 Press one of the Preset buttons (1 through 6).

The selected service is received.

By selecting the mode in the “Changing the Display Mode” (page 31), the display shows the status of the broadcasting stations that have been received as follows:

Channel No. Display: the channel numbers of received stations are displayed.

Ensemble Label Display: the Ensemble Label of received station is displayed.

Service Label Display: the Ensemble Label is displayed for 2 seconds and then the Service Label is displayed after receiving the broadcasting station.

Component Label Display: the Ensemble Label is displayed for 2 seconds, then the Service Label is displayed for 2 seconds, and then the display is changed to the Component Label after receiving the broadcasting station.

Dynamic Label Display: the Ensemble Label is displayed for 2 seconds, then the Service Label is displayed for 2 seconds, and then the display is changed to the Dynamic Label after receiving the broadcasting station.

Frequency Display*1 : the frequency of received stations are displayed.

•To switch the frequency display on the CDA-9813R/CDA-9812RX/ CDA-9811R, press TITLE. For details, see “Changing the Display Mode” (page 31).

•When you receive the Secondary Service Component, you memorize the service, but when you call out this memorized service, the Primary Service Component will be called out.

*1 CDA-9813R/CDA-9812RX/CDA-9811R only

Memorizing the Ensemble Automatically

1 Press BAND/TEL. to select the band that you want to receive.

2 Press and hold TUNE/A.ME for at least 2 seconds.

The ensemble is searched for, and six ensembles are automatically received and memorized with the preset buttons (1 through 6).

When memorization has completed, the Ensemble that was memorized last is received.

By selecting the mode in the “Changing the Display Mode” (page 31), the display shows the status of the broadcasting stations that have been received as follows:

Channel No. Display: the channel numbers of received stations are displayed.

Ensemble Label Display: the Ensemble Label of received station is displayed.

Service Label Display: the Ensemble Label is displayed for 2 seconds and then the Service Label is displayed after receiving the broadcasting station.

Component Label Display: the Ensemble Label is displayed for 2 seconds, then the Service Label is displayed for 2 seconds, and then the display is changed to the Component Label after receiving the broadcasting station.

Dynamic Label Display: the Ensemble Label is displayed for 2 seconds, then the Service Label is displayed for 2 seconds, and then the display is changed to the Dynamic Label after receiving the broadcasting station.

Frequency Display*2 : the frequency of received stations are displayed.

•To switch the frequency display on the CDA-9813R/CDA-9812RX/ CDA-9811R, press TITLE. For details, see “Changing the Display Mode” (page 31).

•If no ensemble is received, the one that has been received before you perform this automatic memorization is received.

*2 CDA-9813R/CDA-9812RX/CDA-9811R only

PTY (Programme Type) Tuning

1 Press F/SETUP so that the “FUNC” indicator lights up. (Only the underlined portion of the “FUNC” indicator for CDA-9811R.)

2 Press 3/PTY to go to the PTY Select mode.

3 Press g or f to select your desired programme type.

4 After selecting a programme type, and when the “FUNC” indicator lights up (only the underlined portion of the “FUNC” indicator for CDA-9811R), press 3/PTY to go to the PTY Search mode.

•To cancel the PTY Search mode during the PTY search, press the PTY button.

5 When the station is received, the received programme type is displayed for 5 seconds. If no station is found, “NO PTY” is displayed for 5 seconds.

30-EN

• Above functions can be performed only for services within an

Ensemble.

 

Page 31 Page 33
Image 32
Page 31 Page 33
Contents CDA-9815RB CDA-9813R CDA-9812RB CDA-9812RR CHM-S630 CHA-S634 CHA-1214Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Getting Started Press DISP/B.OUT to switch the display pattern Detaching and Attaching the Front PanelManual Storing of Station Presets Automatic Memory of Station PresetsTuning to Preset Stations RadioSetting RDS Reception Mode and Receiving RDS Stations Press Search in Radio mode to switch to Title Search modeStation Title Search Function Quick Search FunctionRecalling Preset RDS Stations PI Seek SettingReceiving RDS Regional Local Stations Receiving Traffic InformationPTY Programme Type Tuning When traffic information stations cannot be receivedPress T.INFO to deactivate the Traffic Information mode Receiving Traffic Information While Playing CD or RadioPress 2/P.PTY to activate the Priority PTY mode again Priority PTY Programme TypeDisplaying Radio Text 12-ENPlayback 13-ENPress 5 in the play or pause mode Repeat PlayX. Random Play 14-ENFile Search mode Folder Search modeScanning Programmes Quick SearchTerminology 16-ENSound Setting Setting the Bass Control CDA-9812RX/CDA- 9811R onlyPress Rotary encoder repeatedly to choose the desired mode 17-ENSetting the Treble Control CDA-9812RX/CDA- 9811R only Setting the Bass Type CDA-9812RX/CDA- 9811R onlyEqualizer Presets CDA-9815RB/CDA-9813R only 18-EN19-EN WAY System 20-ENAbout Time Correction Example 1. Listening Position Front Left SeatExample 2. Listening Position All Seats 21-ENExample setting for steps 2 Press T.CORR/X-OVER to select the Bass Focus modeBass Focus 22-ENSetting the MX Mode Press BAND/TEL. to select a speaker to be adjustedPress Rotary encoder to return to normal mode 23-ENAbout the indicator display Other FunctionsDisplaying the Title/Text 24-ENBlackout Mode On and Off Titling Discs/StationsErasing Disc Title/Station Title 25-ENPersonalize About i-PersonalizeData Downloading 26-EN27-EN Sound CustomizingVisual Customizing External Device 28-ENUsing DAB Receiver for the Ensemble Seek Tuning Optional Changing the ServiceChanging the Service Component DAB OptionalMemorizing the Service Receiving the Memorized ServiceSelected service is received Memorizing the Ensemble Automatically31-EN Setting the Announcement Select ModeChanging the Display Mode Setting for Automatic Change from DAB to Setting ON/OFF for DRC Dynamic Range ControlDisplaying the Regional Label Receiving Announcement Information of DAB Local StationsTelephone Mode ON/OFF MobileHub Link OperationOptionalIncoming Calls About MobileHub LinkSMS Short Message Service Operation Calling by using the Speed DialCalling Calling by the address bookChanger Optional Controlling CD Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalRemote Control 36-ENInformation Case of DifficultyBasic Radio38-EN Indication for CD PlayerIndication for CD Changer Specifications Remote Control CDA-9815RB/CDA-9813R/CDA-9812RX only39-EN Bottom side of playerInstallation and Connections 40-ENRemoval Installation41-EN Connections for CDA-9812RX/CDA-9811R 42-EN43-EN To prevent noise/interference in the audio systemConnections for CDA-9815RB/CDA-9813R 44-ENAntenna Receptacle # System Switch 45-EN
Related manuals
Manual 48 pages 34.04 Kb
Top Page Image Contents