How to view the Display
Soft button operation
•Be sure to touch the button lightly with the pad of your finger on the display to protect the display.
•If you touch a button and there is no reaction, remove your finger from the display, and try again.
About the button descriptions used in this Owner’s Manual
•The buttons found on the face of the unit are expressed in bold (e.g. SETUP). The buttons found on the
•Whenever a soft button and a head unit button have the same function, the explanations in this Owner’s Manual will describe the function of the soft button.
Recalling the Source
Here is an example explanation for the Radio mode display on how to recall a source.
1 Press 
SOURCE to activate mode switching screen.
2 Slide the display horizontally with your finger to select Audio/Visual mode.
Each time you slide the display, the mode switches circularly in the following order:
Audio/Visual 
Navigation*1 
Camera*2 
Telephone*3 
Multi Info 
Audio/Visual
*1 Displayed only when NAV. IN is set to ON. Refer to “Setting the Navigation Mode” (page 20).
*2 Displayed only when Camera IN is set to RCA or DIRECT. Refer to “Setting the Rear Camera Input” (page 20).
*3 Displayed only when Bluetooth IN is set to
•The mode can also be switched by pressing 
and 
.
•If the current mode is not Audio/Visual mode, you can switch to the Audio/Visual mode directly by pressing 
SOURCE.
Display example for mode switching screen
Changes to the Rear Selection screen when “Setting the Picture Output” (page 21) is set to ON.
Touch and hold at least 2 seconds to change to the SETUP selection screen.
Displays the name and image of the current mode. Displays the icons of the five modes (icon of the current mode is highlighted).
3 Slide the display vertically with your finger, or press
SOURCE repeatedly to select RADIO source.
4 Touch the RADIO source window displayed in the center of the screen.
The Radio source is activated and the display changes to the Radio main screen.
Display example for FM Radio main screen
Displays the source name, such as radio band, etc., that is selected.
Display time, missed call*1, signal strength*1, etc. Function Guide:
The function guide display varies depending on each source.
The contents of the function guide change by touching
[P1/2]*2, [P1/3]*2, [P1/4]*2 or [ 
] on the function guide, and many other operations can be performed.
*1 Displayed only when the BLUETOOTH function is used. *2 Display may vary depending on the connected devices.
5 Repeat the procedure to select another source.
•If no operation is performed for 5 seconds, during mode switching or Audio/Visual source selection, the screen will automatically switch to the current mode or source.
•You can select source in the Audio/Visual mode only.