External Audio Processor (Optional)
A compatible, external audio processor is operable from this unit when connected. Some audio processors may require a wired controller. The explanations below use the
Refer to the operating instructions of the audio processor for more details.
•The adjustments or settings performed on the connected audio processor cannot be operated properly from this unit.
•The setting “Setting the Speakers”, “Setting Bass Sound Control”, and “Graphic Equalizer Adjustments” are not available if the
•This unit cannot be connected to the
To display the Audio processor mode screen:
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
1Bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2Keep pushing the foot brake and release the parking brake once then engage it again.
3When the parking brake is engaged for the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the Audio processor mode operation has been released. Engaging the parking brake can reactivate the Audio processor mode, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of “To display the Audio processor mode screen.” Each time the ignition is turned OFF, perform the procedure of “To display the Audio processor mode screen.”
Adjustment Procedure for Dolby Surround
Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater accuracy.
Adjustment procedure
1 | Speaker Setup (page 30) |
| (Turning the speakers to be used on and off and |
| setting their response) |
2 | Adjusting the speaker levels (Output Level) |
| |
| (page 30) |
| (Adjusting the signal output level to the various |
| speakers) |
3 | Mixing bass sound to the rear channel |
(Rear MIX) (page 30) | |
| (Achieving smooth sound in the rear seat by mixing |
| the front audio signals with the rear speaker signals) |
4 | Adjusting the acoustic image |
(page 30) | |
| (Adjusting the acoustic image to achieve a sound as |
| if the center speaker were directly in front of the |
| listener) |
5 | Achieving powerful high volume sound |
(Listening Mode) (page 30) | |
| (Achieving energetic sound with even greater power, |
| like the sound in a movie theater) |
6 | Adjusting the DVD Level (page 31) |
| (Adjust the volume (signal level) in the Dolby Digital, |
| Pro Logic II, DTS and PCM modes) |
7 | Storing Settings in the Memory (page 31) |
(Storing all the settings and adjustments made on the |
iXA-W407 (not only the above settings/adjusts) in the memory)
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby Surround adjustments.