Sound (Beep) Guide Function
Setting item: Beep
Setting contents: OFF / ON
OFF: Deactivates the Sound Guide mode. The sound guide beep will not be produced when a button on the unit is pressed.
ON: Activates the Sound Guide mode.
Setting the Scroll
Scroll display is available if folder name, file name or tag information is entered.
Setting item: Auto Scroll
Setting contents: OFF / ON
OFF: Turns off the AUTO scroll mode. Scroll display is done once as a track is changed.
ON: Turns on the AUTO scroll mode. Scroll display is repeated as long as the mode is turned on.
•The display scrolls on the unit when the screen is filled up.
•Song, artist and album name, etc. scrolls when an iPhone/iPod is connected.
Setting the Language
Seven types of font can be selected.
Setting item: Language Select
Setting contents: CHI / JPN / ARA / THA /
CHI: Chinese Font Display
JPN: Japanese Font Display
ARA: Arabic Font Display
THA: Thai Font Display
RUS1: Russian Font Display
RUS2: European Font Display
•When “CHI (Chinese)” is selected from “Language Select”, Chinese font (GB2312) is used and displayed. If you select other than “CHI (Chinese)”, another font is used.
A Unicode file can be displayed regardless of the setting (excluding Chinese). However, a
Adjusting the Dimmer of Button Lighting at Night
You can adjust the brightness of the button lighting at night with the dimmer.
Setting item: LED Dimmer Level
Setting level:
System Setup
System Setup Operation
To display the System mode screen:
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
1Bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2Keep pushing the foot brake and release the parking brake once then engage it again.
3When the parking brake is engaged for the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the System mode operation has been released. Engaging the parking brake can reactivate the System mode, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of “To display the System mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the System mode screen.”
The following steps 1 to 4 are common operations to each “Setting item” of System Setup. Refer to each section for details.
1 Press and hold SETUP for at least 2 seconds.
The SETUP selection screen is displayed.
2 Touch [ 
] of System Setup.
The SYSTEM SETUP screen appears.
3 Touch [
], [
] or [ 
] etc., of the desired item to change its setting.
Setting items:
IN Int. Mute*1 / IN Int. Icon / Remote Sensor*2 / Camera IN / NAV. IN / NAV. Mix*3 / AUX1 IN / AUX2 IN / AUX OUT / Bluetooth IN / USB Adapter / Option Key
*1 Displayed only when Bluetooth IN is OFF.
*2 When ON is set in “Setting the Picture Output” (page 21), the item is displayed.
*3 When ON is set in “Setting the Navigation Mode” (page 20), the item is displayed.
4 Touch [
] to return to the previous screen.
Touch and hold [
] for at least 2 seconds to return to the main source screen that was displayed before the setup operation was started.
•Immediately after changing the settings of System Mode (while the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed.