Alpine iXA-W407 owner manual Adjusting the Parametric Equalizer Curve P-EQ, 33-EN

•When OFF is selected, MX effect of each MX mode will be OFF.

•Each music source, such as radio, CD and MP3/WMA/AAC can have its own MX setting.

•MX mode does not function when MX is ON for AM radio.

•MX CMPM is applied for MP3/WMA/AAC and iPhone/iPod.

•MX SAT is applied for XM, SIRIUS and HD Radio reception.

•The MX setting can be performed only when a source is currently selected.

Adjusting the Parametric Equalizer Curve (P-EQ)

You can modify the Equalizer settings to create a response curve more appealing to your personal taste.

Setting item: P-EQ

1 Select L+R by touching [ ] of P-EQ.

When Graphic EQ is set to L+R, the setting will be turned off.

2 Touch [ ] of P-EQ after selecting L+R.

The P-EQ list screen appears.

3 Adjust the P-EQ to your preference.

Adjusting the Band

Touch [ ] or [ ] of BAND to select the band to be adjusted.

BAND1 / BAND2 / BAND3 / BAND4 / BAND5

Adjusting the Frequency

Touch [ ] or [ ] of Freq. to adjust the frequency of the selected band.

Adjustable frequency bands:

20 Hz to 20 kHz (in 1/3 octave steps)

Band-1: 20 Hz~80 Hz (63 Hz)

Band-2: 50 Hz~200 Hz (150 Hz)

Band-3: 125 Hz~3.2 kHz (400 Hz)

Band-4: 315 Hz~8 kHz (1 kHz)

Band-5: 800 Hz~20 kHz (2.5 kHz)

Adjusting the Level

Touch [ ] or [ ] of Level to adjust the level of selected band.

Adjustable level: –6 to +6 dB

Setting the Bandwidth

Touch [ ] or [ ] of Q to select the bandwidth.

Adjustable bandwidth: 1, 1.5, 3

4 To adjust another band, repeat step 3 and adjust all bands.

•The frequencies of adjacent bands cannot be adjusted within 4 steps.

•While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers.

•When the Parametric EQ is adjusted, the adjustment for Graphic EQ becomes ineffective.

Adjusting the Graphic Equalizer Curve (G-EQ)

You can modify the equalizer settings to create a response curve more appealing to your personal taste.

Setting item: G-EQ

1 Select L+R by touching [ ] of G-EQ.

When Parametric EQ is set to L+R, this setting will be turned off.

2 Touch [ ] of G-EQ after selecting L+R.

The G-EQ list screen appears.

3 Adjust the G-EQ to your preference.

Adjusting the Band

Touch [ ] or [ ] of BAND to select the band to be adjusted.

BAND-1 (63 Hz) / BAND-2 (150 Hz) / BAND-3 (400 Hz) / BAND-4 (1 kHz) / BAND-5 (2.5 kHz) / BAND-6 (6.3 kHz) / BAND-7 (17.5 kHz)

Adjusting the Level

Touch [ ] or [ ] of Level to adjust the level of selected band.

Adjustable output level: –6 to +6 dB

4 To adjust another band, repeat step 3, and then adjust all bands.

•When Graphic EQ is adjusted, the adjustment for Parametric EQ becomes ineffective.

Setting the Time Correction Unit (T.Corr Parameter)

You can change the unit, (cm or inch) of time correction. Touch [ ] or [ ] of T.Corr Parameter to select cm or Inch.

Setting item: T.Corr Parameter

cm Inch

cm: The unit of time correction is cm.

Inch: The unit of time correction is Inch.

33-EN