Alpine DVA-7996 owner manual Switching the angle, Searching directly By chapter or track number

DVD/Video CD Operation

Switching the angle

DVD

ENTER	DISP/
Joystick	TITLE
	MENU
0 ~ 9

AUDIO ANGLE

SUB T.

Searching directly

by chapter or track number	DVD
	Video CD

Use this function to easily move to the beginnings of the chapters or tracks on the disc.

1 Except during the stop mode, input the number of the chapter or track you want to play using the number keys (“0” to “9” ).

(The monitor display when chapter 12 is input.)

2 Press the ENTER button.

Playback starts from the selected chapter or track.

NOTES

∙This function cannot be used on discs on which no chapter numbers are recorded.

∙If the chapter number is a 3-digit number, playback starts automatically even if the ENTER button is not pressed at step 2.

∙Press the DEL. button to delete the last digit in the chapter/track number. Press and hold the DEL. button for at least 2 seconds to clear “Chapter” and “Track” numbers.

∙Press the RTN button to cancel the chapter/track search mode and resume normal playback.

∙With video discs containing playback control (PBC), the “searching directly by track number” function is not available while PBC is ON. Press the MENU button to turn the PBC function off.

∙If the chapter/track number is known, you can search directly using the number keys (“0” to “9”) during playback mode, PRE-STOP mode, etc.

On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.

1 During playback, press and hold the ANGLE button.

The angle switches between the angles recorded on the disc each time the button is pressed.

NOTES

∙Some time may be required for the angle to change.

∙Depending on the disc, the angle may switch in one of two ways.

-Seamless: The angle switches smoothly.

-Non-seamless: When the angle is switched, a still picture is displayed first, after which the angle switches.

∙This operation cannot be performed using the

ANGLE button on the main unit.

Switching the audio tracks	DVD
	Video CD

DVDs can have up to 8 different audio tracks. These alternate tracks can be switched during playback.

1 During playback, press and hold the AUDIO button.

The sound switches between the alternate audio tracks recorded on the disc each time the button is pressed.

NOTES

∙The alternate track selected becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not include that track, the disc’s default language is selected instead.

∙Not all discs will allow changing the alternate audio tracks during playback. In these cases, select audio tracks from the DVDs menu.

∙There may be a delay before the selected alternate track begins to play.

•Video CDs with multiplex audio

1 During playback, press and hold the AUDIO button.

The left and right channels will be output as shown in the figure below, each time the button is pressed.

LL RR LR

32-EN