Alpine CDA-9887 owner manual 23-EN

Playing MP3IWMAJAAC Data (Play Mode)

CD-DA (Initial setting) / CDDA&MP3IWMA

This unit can play back CDs containing both CD and MP3IWMA/AAC data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and the MP3IWMAIAAC data, playback starts from the CD data portion of the disc.

CD-DA:	Only the CD data in Session 1 can be played
	back.

CDDA&MP3IWMA: CD data, MP3/WMA/AAC files in mixed mode, and multi-session discs can be played back.

•Perform this setting before inserting a disc. If a disc has already been inserted, remove itfirst. (If you use an MP3 changer, you have to change discs.)

Sound (Beep) Guide Function

Beep ON (Initial setting) / Beep OFF

This function will give audible feedback with varying tones depending upon the button pressed.

Turning Mute Mode On/Off (INT Mute)

INT Mute ON / INT Mute OFF (Initial setting)

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.

Setting the AUX Mode (V-Link)

AUX IN ON / AUX IN OFF (Initial setting)

You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-l2lB) or Versatile Link Terminal (KCA-4l0C) to this component.

You can change the AUX name display when AUX IN is set to ON. Press ~/IlIENT when AUX IN is set to ON, and select AUX Name by turning the Rotary encoder, then press ~ /11 lENT.

After that, tum the Rotary encoder to select the desired AUX name. If the KCA-4l0C is connected, it is possible to select two AUX names.

•Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/~ to select AUX mode and

then press BAND to select your desired device.

Changer Name Setting

Changer (Initial Setting) / USB / Portable

This setting is used when the head unit is connected to the USB Adapter for MP3 (KCA-620M). You can set the name to be displayed on the unit depending on the device to which the USB Adapter for MP3 (KCA-620M) is connected.

Setting the External Digital Input (Digital AUX)

Digital AUX ON / Digital AUX OFF (Initial setting)

When an ALPINE Ai-NET compatible digital audio processor (PXA-H70l) and a DVD player (DVE-5207) not compatible with Ai-NET are connected, set Digital AUX to ON to enjoy 5.l-channel surround sound.

•Press SOURCE/~ , and select the D.AUX mode, and adjust the volume, etc.

•Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player's power to OFF.

Connecting to an External Amplifier

Power IC ON (Initial setting) / Power IC OFF

When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.

Power IC OFF: Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit'sinternal amplifier is turned OFF and can not drive speakers.

@):x: Amplifier			Front
			left
~			Front
@):x: Amplifier			right
			Rear
			left
~			Rear
			right
Power IC ON : The speakers are driven by the built-in
amplifier.
			Speakers
SPEAKER	~	~	Front
RIGHT FRONT
			right
	8	8
SPEAKER	8	8	Rear
RIGHT REAR
	~	~	right
SPEAKER	~	~	Rear
LEFT REAR
	8	8	left
SPEAKER	8	8	Front
LEFT FRONT

.	~	left
		~
	No sound is produced by the system when the power output is set to

OFF.

Setting the Language Font (Language Set)

Language 1 (Initial Setting) / Language 2

You can select between two types of language fonts.

Language 1 :	Normal Font
Language 2 :	European Font

Demonstration

Demo ON / Demo OFF (Initial setting)

This unit has a Demonstration feature for the display with sound.

• To quit Demo mode, set to Demo OFF.

23-EN