UMP8015
WIRING
CD Changer Connector
Antenna Connector
CAUTION: Failure to wire exactly as shown may cause electrical damage to the radio.
15
Subwoofer Output Connect to optional subwoofer.
Blue
Blue
Black
Power Antenna
Connect to power antenna or amplifier. If not used, tape bare end of wire.
Ground
Connect to ground terminal.
Amplifier Wiring
Connect line out for optional external amplifiers. The red connector is for the right and the white connector is for the left.
WARNING! Never combine (bridge) outputs for use with 1 speaker.
WARNING! Never ground negative speaker leads to chassis ground.
Gray
LF/AVG
White/Black
White (+)
LR/ARG
Green/Black
Green (+)
Yellow
Red
0.5A |
RF/AVD
Gray/Black
Gray (+)
RR/ARD
Violet/Black
Violet (+)
+
Memory/Battery
Connect to battery or 12 volt power source that is always live. The radio will not work if this wire is not connected.
Accessory/Ignition Connect to existing radio wire or radio fuse.
Fuses
When replacing a fuse, make sure the new fuse is the correct type and amperage (15 amp ATO). Using an incorrect fuse could damage the radio.
4