Sony CDX-C910RDS Locating a disc by name, Selecting the specific tracks for playback, Bank Edit

4 Rotate the dial to select the name that you want to erase.

5 Press (5) (ENTER) for two seconds. The name is erased.

Repeat steps 4 and 5 if you want to erase other names.

6 Press (LIST) for two seconds.

The unit returns to the normal CD playback mode.

Locating a disc by name

—List-up (CD changer with custom file function or MD changer)

You can use this function for the discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a CD” (page 20).

1 Press (LIST) momentarily.

The name assigned to the disc currently playing appears in the display.

LST 4SCHUBERT

5 BACH

2 Press (LIST) repeatedly until you find the desired disc.

3 Press (5) (ENTER) to play back the disc.

Notes

•To turn off the display, press (DSPL). Once a disc name has been displayed for five seconds, the display goes back to its normal playback mode.

•The track name are not displayed during MD playback.

•If there are no discs in the magazine, “NO Disc” appears in the display.

•If a disc has not been assigned a custom file, “********” appears in the display.

•If the disc information has not been read by the unit, “?” appears in the display. To load the disc, first press the number button, then choose the disc that has not been loaded.

•The information is appears only in upper cases. There are also some letters which cannot be displayed (during MD playback).

Selecting the specific tracks for playback

— Bank/Custom File

(CD changer with custom file function)

If you label the disc, you can set the unit to skip tracks and play only the tracks you want.

1 Start playing the disc and press (SHIFT). Then press (3) (P.MODE) for two seconds.

Bank edit mode.

	CD1	Bank	edit
EQ SUR	2	2	Play
	DISC	TRACK

Note

If you have not labeled the disc, the bank edit mode does not appear and the programme edit mode appears. To go back to the normal playback mode, press (3) (P.MODE) for two seconds.

2 Press either side of (SEEK/AMS) to select the track number you want to skip and press (5) (ENTER).

	CD1	Bank	edit
EQ SUR	2	4	Skip
	DISC	TRACK

The indication changes from “Play” to “Skip.” If you want to return to “Play,” press (5) (ENTER) again.

3 Repeat step 2 to set the “Play” or “Skip” mode on all the tracks.

4 Press (3) (P.MODE) for two seconds. The unit returns to the normal CD playback mode.

5 Press (SHIFT).

Notes

•You can set the “Play” and “Skip” mode on up to 24 tracks.

•You cannot set the “Skip” mode on all the tracks.

EN

CD/MD Changer

21

Actual total number: Sony CDX-C910RDS (E,F,G) 3-856-717-11(2)