Others
Symptom | Cause/Remedy |
|
|
The recorder does | • The rechargeable battery is not charged. |
not work or works | , Charge the rechargeable battery. |
poorly. | • The volume is low. |
| , Turn up the volume. |
| • No disc is inserted. |
| , Insert a recorded disc. |
| • The HOLD function is turned on (“HOLD” appears in the display |
| when you press an operation button on the recorder). |
| , On the recorder, disable HOLD by sliding the HOLD switch to |
| the opposite direction of the arrow. |
| • The lid is not firmly closed. |
| , Close the lid until it clicks. Then slide OPEN to open the lid. |
| • Moisture has condensed inside the recorder. |
| , Take the MD out and leave the recorder in a warm place for |
| several hours until the moisture evaporates. |
| • The rechargeable battery or dry battery is weak (“LoBATT” |
| flashes or nothing appears). |
| , Charge the rechargeable battery or replace the dry battery with |
| the new one, or connect the supplied AC power adaptor to the |
| recorder. |
| • The dry battery have been inserted incorrectly. |
| , Insert the battery correctly. |
| • The disc is damaged or does not contain proper recording or |
| editing data. |
| , Reinsert the disc. Rerecord the disc. If the error message still |
| appears, replace it with another disc. |
| • While operating, the recorder received a mechanical shock, too |
| much static, abnormal power voltage caused by lightning, etc. |
| , Restart the operation as follows. |
| 1 Disconnect all the power sources. |
| 2 Leave the recorder for about 30 seconds. |
| 3 Connect the power source. |
|
|
62