Sony MZ-N510 operating instructions Playing groups, Recording a track to an existing group

Press MENU.

Recording a track to an existing group

You can add a track to an existing group.

1 Press GROUP, and then press . or

>until the group you want to add a track to appears in the display.

2 Press N while pressing REC •

T MARK.

3 Play the source sound.

Newly recorded track is added after the current contents in the group.

z

•To add a track that is currently playing to a group, stop or pause playing the track first, and then do the procedure from step 2.

•You can set the recorder to always create a new group without pressing the GROUP button. See page 49 for details.

Playing groups

The recorder can operate various playback with a disc which has group setting.

MENU

4-way control key (., >)

+, –

Playing a track in group play

In group play, all groups are played in order, starting with group 1, followed by the unassigned tracks (“Group - -”). Playback stops after all the tracks have been played.

1

2 Press . or > repeatedly until “P-MODE” appears in the display, and then press ENTER.

3 Press . or > repeatedly to

select “ Normal”, and then press

ENTER.

To cue to the start of a group (Group Skip)

On the recorder

1Press GROUP.

2While “ ” flashing, press . or >. Pressing – button cues to the first track in the current group. Pressing the button again cues to the first track of the previous group.

On the remote control

1 Press “ ”+ or –.

40