Sony MZ-B10 service manual 2A15, 2B9800, Patch 023, SCC 023, SDD 023

8.Press the [SPEED CONTROL +] key to set the address value to the next address for adjustment.

Set LCD display

2A15**

adjusted value 023 (blinking : cursor)

address value

•Keys available when the cursor is on the address value

[DISPLAY] key on the remote commander: address value + 1000(h)

[P MODE] key on the remote commander: address value + 0100(h)

[SOUND] key on the remote commander: address value - 0100(h)

key on the remote commander: address value + 0010(h) [SPEED CONTROL +] key: adjusted value + 0001(h)

[SPEED CONTROL -]key: adjusted value - 0001(h)

x key: moving the cursor to the adjusted value

9.Press the x key to move the cursor to the adjusted value.

Set LCD display

2A15**

adjusted value 023 (blinking : cursor)

address value

10.While referring to the patch data list repeat the data correction write procedure from step 6 to 9 until the address 2B98 is com- pleted (until writing the last value at step 7).

Set LCD display (writing is complete to the address 2B98)

2B9800

adjusted value

023

address value (blinking : cursor)

11.Press the [TRACK MARK] key or press the [DISPLAY] key of the remote commander for several seconds to exit the RAM monitor.

Set LCD display

Patch 01

023

MZ-B10

12.Press the X key or press the key on the remote com- mander to write all patch data to the nonvolatile memory.

Set LCD display

***SCC

023

Writing complete

***SDD

023

13. Turn off the power.

31