Recorder
You can use a shortcut to access the list of voice commands direct from the standby display:
aPress 
and scroll left with 
.
aYou can now view the list of Voice commands.
aFollow the instructions shown on the display.
Executing a voice command
xWhen an application using the GPRS connection is sending or receiving data, you cannot execute a voice command. To do so, you must first end the application using the GPRS connection.
To execute a voice command,
aPress 
.
The message Speak now will appear on the display.
aSay the voice command loudly and clearly.
Your car kit phone will play back the voice command and automatically perform the function assigned to it 1.5 seconds later.
Recorder
The tape recorder feature allows you to record pieces of speech, sounds or an active phone call. This is especially useful if you need to note information during a
call: for example, you can record a name or a number to be written down later.
xObey all local laws governing recording of calls. Do not use this feature illegally.
You can make up to 10 recordings as long as you do not exceed an overall recording time of five minutes. Each recording is saved together with the running number, the length and time of the call.
New recordings are automatically saved in the memory. When the memory is full, the message No memory to save rec. will be shown on the display. To be able to make new tape recordings, you will first have to erase some old ones.
a Press and hold | to begin recording during a phone call. |
Copyright © 2004 Nokia. All rights reserved. 49