Pin No. | 
  | Pin Name  | I/O  | 
  | 
  | Description  | |
  | 
  | 
  | 
  | 
  | 
  | ||
80  | 
  | VB MON  | I  | ||||
  | 
  | 
  | 
  | 
  | 
  | ||
81  | 
  | CHG MON  | I  | Rechargeable battery voltage monitor input from the MPC18A31FTA (IC901) (A/D input)  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
82  | 
  | VREF MON  | I  | Reference voltage monitor input from the SN761056ADBT (IC501) (A/D input)  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
83  | 
  | WK DET  | I  | Set key starting detect signal input terminal (A/D input)  | |||
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
84  | 
  | HALF LOCK | I  | Open knob detect switch (S802) input terminal “L”: normal position, “H”: open knob slid  | |||
  | 
  | SW  | |||||
  | 
  | 
  | 
  | 
  | 
  | 
  | |
  | 
  | 
  | 
  | 
  | 
  | ||
85  | 
  | RMC KEY | I  | Remote commander with headphone key input terminal (A/D input)  | |||
  | 
  | 
  | 
  | 
  | 
  | 
  | |
86  | 
  | SET KEY 1 | I  | Set key input terminal (A/D input)  | (x, >, .,VOL +/– keys input)  | ||
  | 
  | 
  | 
  | 
  | 
  | 
  | |
87  | 
  | SET KEY 2  | I  | Set key input terminal (A/D input)  | (B, jog, END SEARCH keys input)  | ||
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
88  | 
  | REC KEY | I  | REC key input terminal  | 
  | 
  | |
  | 
  | 
  | 
  | 
  | 
  | ||
89  | 
  | VRM MON  | I  | VREM voltage monitor input terminal (A/D input)  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
90  | 
  | HIDC MON  | I  | ||||
  | 
  | 
  | 
  | 
  | 
  | 
  | |
91  | 
  | AD GND  | —  | Ground terminal (for A/D converter)  | 
  | ||
  | 
  | 
  | 
  | 
  | 
  | ||
92  | 
  | AVREF | I  | Input terminal for power supply voltage adjustment reference voltage (+2.4V) (for A/D converter)  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
93  | 
  | AVDD | —  | Power supply terminal (+2.4V) (for A/D converter)  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
94  | 
  | TEST0 | I  | Input terminal for the test (normally: fixed at “L”)  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
95  | 
  | TEST1 | I  | Input terminal for the test (normally: fixed at “L”)  | |||
  | 
  | 
  | 
  | 
  | 
  | 
  | |
96  | 
  | 
  | TDI  | I  | Input terminal for JTAG  | Not used (open)  | |
  | 
  | 
  | 
  | 
  | 
  | 
  | |
97  | 
  | TMS  | I  | Input terminal for JTAG  | Not used (open)  | ||
  | 
  | 
  | 
  | 
  | 
  | 
  | |
98  | 
  | TCK  | I  | Input terminal for JTAG  | Not used (open)  | ||
  | 
  | 
  | 
  | 
  | 
  | 
  | |
99  | 
  | TRST | I  | Input terminal for JTAG  | Not used (open)  | ||
  | 
  | 
  | 
  | 
  | 
  | 
  | |
100  | 
  | TDO  | O  | Output terminal for JTAG  | Not used (open)  | ||
  | 
  | 
  | 
  | 
  | 
  | ||
101  | 
  | TSB CLKCTL | O  | TSB clock control signal output terminal  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
102  | 
  | SSB DATA | I/O  | ||||
  | 
  | 
  | 
  | 
  | 
  | ||
103  | 
  | SSB CLK | O  | SSB serial clock signal output to the SN761056ADBT (IC501)  | |||
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
104  | 
  | FLASH WR EN | —  | Not used (fixed at “H”)  | 
  | 
  | |
  | 
  | 
  | 
  | 
  | 
  | 
  | |
105  | 
  | VDD | —  | Power supply terminal (+2.4V)  | 
  | ||
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
106  | 
  | VSS | —  | Ground terminal  | 
  | 
  | |
  | 
  | 
  | 
  | 
  | 
  | ||
107 to 109  | 
  | VLC1 to VLC3  | —  | Power supply terminal for the liquid crystal display (+2.4V)  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
110  | 
  | XCS ADA | O  | Chip select signal output to the A/D, D/A converter (IC301)  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
111  | 
  | XPD ADA  | O  | Power supply control signal output to the A/D, D/A converter (IC301)  | |||
  | 
  | 
  | 
  | 
  | 
  | ||
112  | 
  | XRST MTR DRV  | O  | Reset signal output terminal “L”: reset Not used (open)  | |||
  | 
  | 
  | 
  | 
  | |||
113  | 
  | OPT DET  | I  | DIN plug detect signal input terminal  | |||
  | 
  | 
  | 
  | 
  | |||
114  | 
  | XJACK DET  | I  | LINE IN plug detect signal input terminal  | |||
  | 
  | 
  | 
  | 
  | |||
115  | 
  | XMIC DET  | I  | MIC plug detect signal input terminal  | |||
  | 
  | 
  | 
  | 
  | |||
116  | 
  | XOPT CONT  | O  | Power supply control signal output to the DIN plug laser diode  | |||
  | 
  | 
  | 
  | 
  | |||
117  | 
  | MUTE  | O  | Analog muting on/off control signal output terminal “L”: muting off, “H”: muting on  | |||
  | 
  | 
  | 
  | ||||
118  | XHP STBY TMP  | O  | Power supply control signal output to the headphone amplifier Not used (open)  | ||||
  | 
  | 
  | 
  | 
  | |||
119  | 
  | XCS NV | O  | Chip select signal output to the EEPROM (IC802)  | |||
  | 
  | 
  | 
  | 
  | 
  | 
  | |
120  | 
  | XINT REC SW | O  | Not used (open)  | 
  | 
  | |
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
– 52 –