Flash dial
Instead of accessing the Phonebook menu and scrolling through the list of
Flash dial names, you can link the relevant name card to a hotkey, so that a long press on the chosen key will directly call him (e.g. long press on 2to call your home
or on 3to call your office).
L You can only program keys 2to 9, as keys 0(selection of the language) and 1(voice mailbox) are predefined and cannot be changed.
1To set a hotkey for flash dial, press C, select Settings, Hotkeys and press ,.
2Select a key from 2to 9and press ,.
3Then select Flash Dial, press ,, select a name in the Phonebook displayed and press ,.
4If several numbers are stored for this name, select the one of your choice and press
5In idle mode, press and hold the programmed hotkey to dial the associated entry: the connection is established. Press
L You can also set hotkeys for commands (see “Hotkeys” page 32). Hotkeys can be changed or deleted at any time.
Voice dial
Voice dial also allows you to quickly call a name from your phonebook: instead Voice Dial of programming a hotkey, you simply set a voice command by recording a word
that will call the corresponding name when pronounced.
1To set a voice tag for voice dial, press +, select the name of your choice in the list and press ,.
2Depending on the selected phonebook (see “Phonebooks” page 40), choose:
-SIM phonebook: Voice dial and press ,,
-Phonebook in phone: Show and press ,, then select the phone
number of your choice if several numbers were stored for this name and press ,. Then select Voice dial in the carousel menu, and press ,.