Activate the vibra alert
If you have set the function, your phone vibrates when receiving an incoming
Vibra call (activating the silent mode via the Silence Quicksetting as described above will also activate the vibra alert). Otherwise, proceed as follows:
1In idle screen, press Cand select Settings, Sounds, Vibra alert.
2Press 4or 6to select On or Off and press ,to confirm.
L Activating the vibra doesn’t mute the ringer. If you want to mute it and keep the vibra function on, activate the Silence mode as described above.
Read your mobile phone number
To read your own mobile phone number: in idle screen, press +, select Own numbers, press ,, select Show and press ,again. Your phone number is displayed if present on your SIM card. If not, select New, then follow the instructions.
L If your own number has been stored in the phonebook, you can read it during a call. See “Consulting the Names list” page 20.
During a call, you can…
Adjust the earpiece volume
During a call, press +to access the volume option, then press 4or 8 to decrease the volume, and 2or 6to increase it.
Mute the microphone
You can mute the microphone so that your correspondent cannot hear you.
Mute During a call, press ,, select Mute and confirm by pressing ,.
Unmute the microphone
To unmute the microphone during a call, press ,, select Unmute and Unmute confirm by pressing ,. The microphone is unmuted.
L When using a Bluetooth headset (see page 71), both phone and headset microphones are muted/unmuted.
Write in the notepad
The notepad is a temporary memory in which you can note down a number during a call. To do so during a call, simply enter the number that you want to note. Wait a few seconds for your entry to be stored automatically in the
Main features | 19 |