Philips 825 manual Your mobile phone, Manage calls

Change nickname and view Bluetooth ID

These two menus allow to respectively change the nickname of your mobile

phone (e.g. enter "My mobile" instead of "Fisio 825" which is the default name) Change Nickname and view its Bluetooth ID.

View Bluetooth ID

Change or delete a profile used

BT Headset

3The list of devices and accessories detected by the mobile phone appears,

including a name (e.g., "Philips") and a Bluetooth address (unique identifier made of letters and digits). Press 2or 8to select the headset of your choice, then press ,.

4Enter the Pairing code (also called "PIN code" or "Bluetooth passkey") supplied with your headset, then press +.

5Once the mobile has found the headset, it displays its name and address. Press ,to store this information: your headset is ready for use with

your mobile phone.

1 Select Bluetooth, Bluetooth Setting, Bluetooth Headset, and press ,. 2 Select the current headset profile in the list, then press ,.

3Select Change to change the current profile, or Delete to set a new profile (e.g. to use another headset). Then press ,to confirm your

choice and proceed with configuration and authentification as described above.

L Your mobile can only store one audio profile at a time: if you delete the one available, you must define a new profile by reconfiguring a headset (see “Pair and use a PC or PDA” page 74).

Manage calls

All operations described below imply that the Bluetooth stand-by duration time is set to any value except Off, and that both your mobile and your headset are switched on.

Also note that your mobile phone doesn’t manage resource sharing: if you are using your mobile to transfer data to/from your PC or PDA, you won’t be able to place a call until you have completed the data transfer.

72	Bluetooth
	features