Philips 530 manual Turn on the radio, Seek a station, Preset a station

The headset is activated by default and is also used as the radio antenna. This is why you MUST plug in the headset to listen to the radio, even when using the loud- speaker.

Turn on the radio

1.Once the headset is plugged in, turn on the radio by pressing f, on the top left corner of your mobile phone.

2.Then increase or decrease the volume by pressing the side keys up or down.

You can turn the radio on only when in idle screen, and turn it off any time, even when browsing lists or menus. The radio screen itself will only appear when in idle mode.

3.Pressing the FM button again while the radio is

already on will display the radio screen, pressing cwill bring you back to the idle screen (the radio will stay on).

Seek a station

1.You activate the automatic search for a radio sta- tion by moving the central joystick key < (left) or >(right).

2.Press cto cancel the search.

3.Once your mobile phone has found a station, the corresponding frequency is displayed on the screen and the current radio program is played.

Preset a station

1.You can memorize a selected station on your phone by saving its frequency and name: while

listening to a selected station, press and hold a key from 1to 9.

2.In the screen that appears, enter the name of the radio if required and press ,to save it.

3.The selected key number and the name of the radio station then appear on the screen. The next time you turn the radio on, simply press the key corresponding to the desired preset station.

Move the joystick key +(up) or -(down) to ac- tivate the previous or next preset station. Press and hold

18 Music & Mix