Philips 530 manual Preferred list, Access settings

Access settings

GSM settings

Preferred list

Allows you to build a network list in or- der of preference. Once defined, the Preferred list phone will try to register on a network,

according to your preferences.

Access settings

This menu allows you to create several data profiles: when using WAP or when sending a multimedia message (MMS),

the selected profile will be used to connect to the GSM or GPRS network.

All options described below are operator and/or sub- scription dependent.With some operators, you may re- ceive a SMS which contains access parameters that will be stored automatically. Please contact your network operator for detailed information on this subject.

Change name

Allows you to enter or change the name

of the selected profile. Press ,, enter Change name the name of your choice and press ,

to confirm.

Some pre-configured profiles might be locked, prevent- ing re-programming and renaming.

Show

	Allows you to visualise all parameters of
Show	the selected profile (ISP number, APN,
	etc.), either GSM or GPRS.
GSM settings

Allows you to enter or change the GSM settings and gives you access to the fol-

lowing items:

Login and Password allow you to enter the login and password needed. In both cases, enter the information

and press ,to confirm.

Phone Number allows you to enter the phone number needed to establish a connection. Select Phone numbers

and press ,, then press +or -to select:

-ISDN No. to enter an ISDN ISP number, OR

-Analogic No. to enter an analogic number.

In both cases, enter the «+» sign followed by the number provided by your operator and press ,.

Contact your operator to know what type of number you should select.

Inactivity time allows you to enter an inactivity time pe- riod after which the phone automatically disconnects

(if a connection was in progress) and returns to idle screen. Select Inactivity time and press ,, then enter

a value (in seconds) of over 30 s. and press ,.

Settings 43