Making/Answering Calls
Making calls
1Lift the handset and dial the phone number.
R To correct a digit, press MCN.
2Press M
N.
3When you finish talking, press M
N or place the handset on the base unit or charger.
Using the speakerphone
1Dial the phone number and press MZN.
2 When you finish talking, press M
N.
Note:
RTo switch back to the receiver, press MZN/ M
N.
Adjusting the receiver or speaker volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored in the redial list (each 24 digits max.).
1MTN
2MbN: Select the desired phone number.
3M
N/MZN
R If MZN is pressed and the other party’s line is engaged, the unit automatically redials multiple times.
Erasing a number in the redial list
1MTN
2MbN: Select the desired phone number. a MEraseN
3MbN: “Yes” a MOKN a M
N
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number
and/or PIN in the phonebook, a pause is also needed (page 19).
Example: If you need to dial the line access number “0” when making outside calls with a PBX:
10 a MDN (Pause)
2Dial the phone number. a M
N
Note:
RA 3 second pause is inserted each time MDN (Pause) is pressed.
Answering calls
1Lift the handset and press M
N or MZN when the unit rings.
2When you finish talking, press M
N or
place the handset on the base unit or charger.
Any key answer: You can answer the call by pressing any dial key.
Auto talk: You can answer calls simply by lifting the handset (page 24).
Temporary ringer off: You can turn the ringer off temporarily by pressing M
N.
Adjusting the handset ringer volume
Press MDN or MCN repeatedly to select the desired volume while ringing.
Useful features during a call
Hold
1Press MMenuN during an outside call.
2 MbN: “Hold” a MOKN
3 To release hold, press M
N.
Note:
RAfter holding for 10 minutes, the call is disconnected.
15
PRW110FX(en)_0724_ver012.pdf 15
2013/07/24 13:40:25