Panasonic KX-PRW110FX Controls, Base unit, During a power failure, Battery level

Getting Started

RWhen the batteries are fully charged, “Fully charged” is displayed.

1

Note when setting up

Note for connections

RThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

RThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

During a power failure

The unit will not work during a power failure. We recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack, if you have such a telephone jack in your house.

Note for battery installation

RUse the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 3, 7.

Note for battery charging

RIt is normal for the handset to feel warm during charging.

RClean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if

the unit is exposed to grease, dust, or high humidity.

Battery level

Icon	Battery level
	High
	Medium
	Low
	Needs charging.

Panasonic Ni-MH battery performance (supplied batteries)

Operation	Operating time
In continuous use	11 hours max.
Not in use (standby)	150 hours max.

Note:

RActual battery performance depends on usage and ambient environment.

Controls

Base unit

A B

MN (Locator)

RYou can locate a misplaced handset by pressing MN.

Charge contacts

11

PRW110FX(en)_0724_ver012.pdf 11

2013/07/24 13:40:25