Useful Information
Problem
Time on the unit has shifted.
Cause/solution
RIncorrect time information from incoming Caller ID changes the time. Set the time adjustment to “Manual” (off) (page 23).
SMS (Short Message Service)
Problem
The SMS message centre number is logged in the caller list and the message is not received.
I cannot send or receive SMS messages.
“FD” is displayed.
“FE” is displayed.
“E0” is displayed.
Cause/solution
RSomeone tried to send you a message while SMS is turned off. Turn it on (page 37).
RYou have not subscribed to the appropriate service. Contact your service provider/telephone company.
RThe SMS message centre number(s) are not stored or are incorrect. Store the correct numbers (page 37).
RMessage transmission was interrupted. Wait until the message has been sent before using other telephone functions.
RIf you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details.
RThe unit could not connect to the SMS message centre. Confirm that the correct SMS message centre numbers are stored. Confirm that SMS is turned on (page 37).
RAn error occurred while sending the message. Try again.
RYour phone number is permanently withheld or you have not subscribed to the appropriate service. Contact your service provider/telephone company.
Liquid damage
Problem
Liquid or other form of moisture has entered the handset/base unit.
Caution:
Cause/solution
RDisconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorised service centre.
RTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
49
PRW110FX(en)_0724_ver012.pdf 49
2013/07/24 13:40:28