For example, if you press 
, your display shows:
Figure 8: Using iTAP mode.
If you want a different word (such as Progress), continue pressing the keypad to enter the remaining letters. If you would like to stop at the middle of a word or navigate
between written words, press
.
Tip: Do not worry if you forget how iTAP works. In a text entry display, you can press Options > Text Setup > Text Tutorial to see an explanation.
Tap & Tap Extended Modes
Press 
in a text entry view to switch to tap mode. If you
do not see Abc1 or Abc2, press Options > Text Setup to set Tap mode as your primary or secondary text entry mode.
To enter text in Tap mode, press a keypad key repeatedly to cycle through the letters and number on the key. Repeat this step to enter each letter. The Tap Extended mode works the same way, but includes more special characters and symbols.
Basics – 29