Operating Instructions, Specifications

7.After adjusting the horizontal zero (0) balance, turn the balanced COUNTERWEIGHT (9) counter clockwise until the cartridge manufacturer’s recommend stylus pressure appears on the STYLUS PRESSURE RING (12) where it meets the center line of the TONE ARM

(7) rear shaft.

ADJUSTING THE ANTI-SKATING CONTROL:

Set the ANTI-SKATING CONTROL (13) to the same value as the stylus pressure.

NOTE: IF YOUR TURNTABLE CAME WITH A CN-25 CARTRIDGE, IT HAS A RECOMMENED TRACKING FORCE OF 3.0 GRAMS AND CAN HAVE RANGE FROM 2.5-3.5 GRAMS.

INSTALLING THE DUSTCOVER:

1.Hold the dustcover in position, directly above the turntable, and slide the hinge bases into the holders mounted on the rear panel.

2.Always raise the dustcover before removal.

3.Avoid opening and closing the dustcover during play. Undesirable vibration and stylus skipping can result.

PLAYING 45 RPM RECORDS:

1.When playing a 45 RPM record with a large center hole, first place the 45 ADAPTER (19) on the center spindle.

2.Be sure that the 45 SPEED SELECTOR (14) button is pushed and the 45 speed indicator is illuminated.

ADJUSTING THE PITCH CONTROL:

1.The XL-200 is equipped with a PITCH CONTROL (20). When the PITCH CONTROL is in the center position the speed will be 33 or 45 depending on which SPEED SELECTOR (14) button is pushed.

2.When the PITCH CONTROL (20) is positioned off center, the pitch can vary ±10% depending on the position of the PITCH CONTROL.

3.The PLATTER (2) is equipped with a STROBE RPM INDICATOR STRIP (21). When the PLATTER (2) is spinning, the STROBE LIGHTS (16) illuminate the STROBE RPM INDICATOR STRIP. At 60 Hz the bottom row of dots will appear to be stationary when the speed of the platter is exactly 45 RPM and the second row from the bottom will appear to be stationary at 33 RPM. At 50 Hz, the second row from the top represents 45 RPM and the top row represents 33 RPM.

CONNECTIONS:

1.Plug the AC power plug into an appropriate outlet.

2.See Table A for proper connection of the output RCA plugs and ground connector. Make sure that all the plugs are firmly plugged into the appropriate jacks (phono inputs). To reduce hum, make sure the ground lug is firmly connected to the ground screw.

TABLE A

OUTPUT CONNECTORS	MIXER OR RECEIVER
L (WHITE)	PHONO L CHANNEL
R (RED)	PHONO R CHANNEL

GND (Spade Lug)	GND Screw

OPERATING INSTRUCTIONS:

BASIC OPERATION:

1.Place a record on the SLIPMAT (5) which sits on the PLATTER (2).

2.Select the desired speed by depressing the 33 or 45 SPEED SELECTOR (14) button.

3.Turn the POWER (15) switch to the “ON” position, at which point the STROBE LIGHTS (16) and the speed indicator (for the selected speed) will illuminate.

4.Remove the stylus protector (if applicable to your cartridge).

5.Release the ARM CLAMP (10) found on the ARM REST (11).

6.Push the START/STOP (17) button. The turntable PLATTER (2) will start to spin.

7.Push the CUE LEVER (18) to the “UP” position.

8.Position the tone arm over the desired position on the record and push the CUE LEVER to the “DOWN” position. The TONE ARM (7) will slowly lower onto the record at which time play will begin.

9.When play is over, raise the TONE ARM, move it to the ARM REST, and secure it with the ARM CLAMP.

10.You now have the option of turning off the power by turning the POWER

(15)switch to the “OFF” position, or stopping the PLATTER (2) by pushing the START/STOP (17) button.

SPECIFICATIONS:

TURNTABLE SECTION:
Type	Belt Drive Manual Turntable
Drive Method	Belt Drive
Motor	DC Motor
Speed	33 1/3 or 45 RPM
Wow and Flutter	Less than 0.25% WRMS*

* This rating refers to the turntable assembly and platter only and excludes

effects of records, cartridges or tonearms.

TONEARM SECTION:
Type	Statically Balanced S-Shaped Tonearm
Headshell Weight	5.6 g
GENERAL:
Power Supply	115V 60Hz/230V 50Hz
Power Consumption	5 Watts
Dimensions	17.75" x 5.75" x 14" (450 x 146 x 352 mm)
Weight	8 lbs. (3.75 kg)

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE WEIGHT AND DIMENSIONS SHOWN ARE APPROXIMATE.

INTERRUPTING PLAY:

1.Pushing the CUE LEVER (18) to the “UP” position will cause the TONE ARM (7) to lift stopping play.

2.Pushing the CUE LEVER (18) to the “DOWN” position will cause the TONE ARM (7) to slowly lower onto the record at the point where play

was interrupted.	(5)

XL-200 specifications

The Gemini XL-200 is an advanced unmanned aerial vehicle (UAV) designed for a wide range of applications, offering unparalleled capabilities in surveillance, reconnaissance, and data collection. This cutting-edge drone is a product of years of innovation, combining state-of-the-art technology with outstanding performance attributes.

One of the main features of the Gemini XL-200 is its extended operational range. With a flight radius of up to 100 kilometers, this UAV can cover vast areas while remaining under remote control. This characteristic makes it particularly useful for military applications, border patrol, and disaster management, providing vital intelligence where traditional means may fall short.

Equipped with a dual propulsion system, the Gemini XL-200 can switch between electric and hybrid engines, optimizing fuel efficiency and increasing endurance. It boasts an impressive flight time of over 12 hours, allowing for prolonged missions without the need for frequent refueling. This feature is especially beneficial in scenarios requiring continuous surveillance or long-term monitoring.

The Gemini XL-200's payload capacity is another standout characteristic, supporting a variety of modular sensors and equipment. This flexibility allows operators to customize the UAV for specific missions, whether it's outfitted with high-resolution cameras, thermal imaging sensors, or even communication relays. The ability to adapt to diverse operational requirements is a significant advantage in the rapidly evolving landscape of UAV technology.

In terms of technological sophistication, the Gemini XL-200 is equipped with advanced avionics that enhance navigation and control. The integration of GPS and inertial navigation systems ensures precise positioning, while real-time data transmission capabilities facilitate instant analysis and decision-making. This robust data link technology allows for seamless integration with ground control stations and other assets.

Safety is paramount in UAV operations, and the Gemini XL-200 features multiple redundant systems to mitigate risks. These include backup power sources, custom failsafe protocols, and collision avoidance systems. Such measures ensure the UAV can operate reliably in various environments, bolstering the confidence of operators during critical missions.

In conclusion, the Gemini XL-200 represents a significant advancement in UAV technology, combining range, endurance, adaptability, and safety features. These characteristics make it an ideal choice for military, commercial, and humanitarian applications, setting a new standard in the field of unmanned aerial vehicles. As demands for efficient aerial solutions grow, the Gemini XL-200 is poised to meet and exceed expectations across multiple sectors.