4.Slide the battery door onto the back of the smart device until it clicks into place. Your smart device screen turns on and the Treo screen appears. Wait for the progress bar on the Treo screen to fill and the Windows Mobile® screen to appear.
5.Follow the onscreen instructions to finish the installation.
Note:
If your smart device does not turn on after you insert the battery, you need to charge it by connecting it to the AC charger. If it still doesn’t start, do a soft reset. See “Resetting Your Smart Device” on page 39.
Charging the Battery
The battery comes with a sufficient charge to complete the setup process and activate your phone. After activation, we recommend charging your smart device for 3.5 hours (or until the indicator light is solid green) to give it a full charge. See the Treo 700WX User Guide for tips on maximizing the life of your device’s battery.
1.Plug the AC charger into a wall outlet.
2.Connect the charger cable to the charger jack on the bottom of the device. Make sure the arrow on the connector is facing up, toward your Treo device screen.
3.To confirm that your device is charging, check the indicator light.
■Solid red indicates that your device is charging.
8 | Basics |