AXIS OWNER’S MANUAL
CHARGING CELL PHONES
If your cell phone has a USB charging cord, you can use it. If not, you can purchase one from www.iGo.com, or call
To use the cell phone’s USB charging cord, connect it to the radio’s large USB socket (located under the rubber cover on the back of the radio.) Press the CELL button and the battery power will directly dump charge to your cell phone. The Axis will only charge your cell phone if the battery indicator shows it at half full, or two bars. To charge your cell phone with a low battery, turn the crank for 7 minutes at 130 rpm to charge the cell phone enough to talk for about 5 minutes.
The Axis has a low voltage protection circuit to avoid the battery from dropping too low in voltage from cell phone charging. If the battery symbol on the LCD display shows three bars, it can support cell phone charging. When the battery symbol is blinking, it stops charging your cell phone and you are urged to
9