Xantrex Technology 809-0912 manual Typical Xanbus System Diagram

FSequence IPM Owners Guide.book Page 4 Thursday, October 6, 2011 3:33 PM

Introduction

Xanbus System

The Xanbus system includes the Freedom SW Series Inverter/Charger and other Xanbus-enabled devices. The inverter/charger is the device in a Xanbus system that typically provides network power—500 mA at 12 volts DC. When Freedom Sequence is present in the network, it can also provide the power for the whole Xanbus network. All of the Xanbus-enabled devices, such as Freedom Sequence, the SCP, and the AGS are able to communicate their settings and activity to each other. See Figure 1.

The Xanbus-enabled designation (see below) means that this product works on a Xanbus network. Xanbus-enabled products are:

•Simple to operate and routine tasks are automated,

•Controlled by software that eliminates analog signalling errors,

•Less susceptible to interference and line loss, and

•Upgradable through new software releases.

Shore

Power

SystemAutomatic

ControlGenerator

PanelStart

Freedom Sequence

AC Panel

	BATTERY
	3012
	SW
	FREEDOM
Freedom SW Inverter/Charger	Inverter
	Load Panel

For detailed instructions and a complete list of Xanbus-enabled devices, visit www.xantrex.com.

network

terminator

Generator

AC Loads

network

terminator

Figure 1 Typical Xanbus System Diagram

4 Freedom Sequence Intelligent Power Manager Owner’s Guide