FSequence IPM Owners Guide.book Page 28 Thursday, October 6, 2011 3:33 PM
Circuit Level Advanced Settings
AC Relay Settings
The Freedom Sequence has AC relays1 that can each be used to control an AC load up to 15 amps. Each AC relay has a unique internal identifier (for example, Circuit1, Circuit2, etc.) Freedom Sequence allows the AC relays to be configured with a variety of settings to best manage the AC power on the system. The following settings can be configured for all AC relays.
•Circuit Name (page 29)
•Load Shed (page 30)
•Circuit Type (page 30)
•AC Line (page 30)
•Priority (page 31)
•Reconnect MRGN (page 32)
DC Relay Settings
The Freedom Sequence has DC relays2 which can be used to connect and disconnect DC loads on the system based on battery voltage thresholds. The following settings can be configured for all DC relays.
•Circuit Name (page 29)
•Load Shed (page 30)
•Circuit Type (page 30)
•Gen Soft Start (page 31)
•Batt Low Trig Set (page 32)
•Batt Low Trig Clr (page 32)
•Batt High Trig Clr (page 32)
•Batt High Trig Set (page 32)
|
|
| 1.Six AC relays for PN: |
| 2.Four DC relays for both PNs: |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| 28 |
| Freedom Sequence Intelligent Power Manager Owner’s Guide |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
