Xantrex Technology 809-0912 manual Shore Breaker Mode, SHR BKR Mode, Auto, Manual

FSequence IPM Owners Guide.book Page 14 Thursday, October 6, 2011 3:33 PM

Basic Configuration Settings

Shore Breaker Mode

Shore breaker setting can be set to Auto or Manual.

When set to Auto, the Freedom Sequence is capable of automatically detecting the type of AC source (singe-phase or split-phase) and sets the shore breaker rating (see “Breaker Ratings” on page 15). When split-phase AC source is detected, a 50-amp breaker rating is automatically set. Otherwise, if a single-phase AC source is detected, the breaker rating is set to 30 amps. Because the setting is automatically determined, the shore breaker rating cannot be modified.

When the shore breaker mode is set to Manual, the shore breaker rating can be modified and set between 5 to 50 amps.

By default, the setting for Shore Breaker Mode is Auto.

To change the shore breaker mode from the Device Status screen:

FSPM 00: StatusFSPM 00: Config

L2 Amps	On 0.0A	Mode	[Operating]
Batt Voltage	12.8V	SHR BKR Mode	[Auto]
Circuit Status		SHR BKR Rating	[30.0A]
Config		Circuit Config
2 Press to select	1 Press down until the	4 Press to change	3 Scroll down.
Config.	field is selected.	the setting.
FSPM 00: Config		FSPM 00: Config
Mode	[Operating]	Mode	[Operating]
SHR BKR Mode	[*Auto]	SHR BKR Mode	[Manual]
SHR BKR Rating	[30.0A]	SHR BKR Rating	[30.0A]
GEN BKR Rating		Circuit Config

	5 Press to select a		6 Press to confirm
	new value.		the new value.
FSPM 00: Config
Mode		[Operating]
SHR BKR Mode		[Manual]
SHR BKR Rating		[30.0A]
Circuit Config

14 Freedom Sequence Intelligent Power Manager Owner’s Guide