VTech Guide to Remote Access Code for Your Answering System

Page 34

Answering system operation

Call screening

If you wish to listen to caller’s leaving their message before choosing to answer a call, follow these steps:

1.Set the playback VOL on the base unit to a level greater than 1 by pressing or .

2. If you decide to answer a call while the caller is leaving a message, simply press TALK/FLASH on the handset.. The answering system will stop and you can begin speaking to the caller..

Access code

To retrieve new messages from any touch tone phone from a remote location, an access code is required.. The remote access code can be any two digit number between 10 and 99.. The remote access code has been set to 19 at the factory but it can be changed at any time for your convenience..

Setting the remote access

1.Press SETUP twice, the system announces “Remote access code. To change the setting, press CHANGE.

2.Press CHANGE, the system announces the current setting (the default remote access code is 19..)

3.Press and release CHANGE to advance the remote access code number by one.. Press and hold CHANGE to advance the remote access code by 10..

4.When the desired number is announced.. Press SETUP to save and advance to the next menu option.. Or press PLAY/STOP / to save and exit..

Basic operation

www.vtechphones.com

33

Image 34
Contents User’s Manual Table of contents Additional information Need HELP? Parts checklist Getting startedInstall handset battery InstallationChoose a location Connect power to base unit/chargers Connect to phone lineTroubleshooting Check battery indicatorCheck for dial tone If you subscribe to DSL service Belt clip optionalWall mounting optional Handset layout Base unit layout Getting startedHandset LEDs Basic operationHandset icons Base LEDsHandset operation Mute IntercomCall forward Conference call Call transferFind handset Directory Store a new entryCharacters by number KeyReview/dial from the directory Edit a directory entryDelete a directory entry Caller ID Caller ID call waiting IDReview caller ID Store caller IDUnable to Save Already Saved List Full Dial from caller ID Delete caller IDHandset name preset to Vtech Handset settingsRinger volume Ring toneLanguage preset to English Clear voicemailDay and time announcements Answering system operationTurn your answering system off and on To set day and timeTo check day and time Outgoing announcement Menu featuresRecord outgoing announcement Listen to outgoing announcement Press PLAY/STOP Delete outgoing announcementAnnouncements Message playbackOptions during playback Record a memo Delete all messagesRecord and play memos Playback a memoSetting the remote access Access codeCall screening Remote access Purpose Press ActionAnnounces Record after the tone. Press Stop when you Purpose Press Action to followTurn the announcement only mode off or on Announcement only modeMessage alert Base ringer Customize the announcement only messageToll saver Answering system operation Message window display Display ExplanationHeadset operation Headset operationOperating Range Replace the handset battery BatteriesTroubleshooting Problem SuggestionUnable to Call TRY Again displaysProblem Suggestion Troubleshooting Troubleshooting For further instruction For this to take place Maintenance WarrantyHow do you get warranty service? Important safety instructions FCC, Acta and IC regulations FCC Part 68 and ActaRbrc Seal Technical specifications Index Index 91-000468-010-000
Related manuals
Manual 1 pages 20.39 Kb Manual 58 pages 31.01 Kb