VTech i6775 user manual For further instruction

Page 48

Troubleshooting

Problem

Suggestion

 

 

The charge light is off..

• Clean the handset and base charging contact each month using a pencil eraser or cloth..

 

• Make sure the power and line cords are plugged in correctly and firmly.

 

• Reset the base.. Unplug the unit’s electrical power.. Wait for 15 seconds then plug it back in..

 

Allow up to one minute for the handset and base to reset..

 

• Your phone might be malfunctioning.. Please refer to the Warranty section of this user’s manual

 

for further instruction..

My Caller ID isn’t

• Caller ID is a subscription service.. You must subscribe to this service for this feature to work

working..

on your phone..

 

• Your caller must be calling from an area that supports caller ID..

 

• Both you and your caller’s telephone companies must use caller ID compatible equipment..

My answering

• Make sure system is turned ON (the ON/OFF key is illuminated)..

machine is not

• Make sure the announce only feature is set to OFF..

recording messages..

 

I cannot hear recorded

• Using the base volume control, raise the volume to a comfortable listening level..

messages..

 

 

 

CL is flashing in the

• You need to set the day and time.. Refer to the section(s) on setting day and time in this

base message display

user’s manual..

window..

 

 

 

www.vtechphones.com

47

Additional information

Image 48
Contents User’s Manual Table of contents Additional information Need HELP? Parts checklist Getting startedInstallation Install handset batteryChoose a location Connect power to base unit/chargers Connect to phone lineCheck battery indicator TroubleshootingCheck for dial tone If you subscribe to DSL service Belt clip optionalWall mounting optional Handset layout Base unit layout Getting startedBasic operation Handset iconsHandset LEDs Base LEDsHandset operation Mute IntercomCall forward Call transfer Conference callFind handset Directory Store a new entryCharacters by number KeyReview/dial from the directory Edit a directory entryDelete a directory entry Caller ID Caller ID call waiting IDReview caller ID Store caller IDUnable to Save Already Saved List Full Dial from caller ID Delete caller IDHandset settings Ringer volumeHandset name preset to Vtech Ring toneLanguage preset to English Clear voicemailAnswering system operation Turn your answering system off and onDay and time announcements To set day and timeTo check day and time Menu features Outgoing announcementRecord outgoing announcement Listen to outgoing announcement Press PLAY/STOP Delete outgoing announcementMessage playback AnnouncementsOptions during playback Delete all messages Record and play memosRecord a memo Playback a memoAccess code Setting the remote accessCall screening Remote access Purpose Press ActionAnnounces Record after the tone. Press Stop when you Purpose Press Action to followAnnouncement only mode Turn the announcement only mode off or onMessage alert Customize the announcement only message Base ringerToll saver Answering system operation Message window display Display ExplanationHeadset operation Headset operationOperating Range Replace the handset battery BatteriesTroubleshooting Problem SuggestionUnable to Call TRY Again displaysProblem Suggestion Troubleshooting Troubleshooting For further instruction For this to take place Maintenance WarrantyHow do you get warranty service? Important safety instructions FCC, Acta and IC regulations FCC Part 68 and ActaRbrc Seal Technical specifications Index Index 91-000468-010-000
Related manuals
Manual 1 pages 20.39 Kb Manual 58 pages 31.01 Kb