•In some areas, tone dial phone from a remote location phone may not function due to telephone line conditions such as line noise, echo, etc..
Answering system operation
Message alert
The message alert function produces an audio tone to remind you that there are new messages on the answering system..
1.Press SETUP three times and you will hear “Message alert. To change the setting, press CHANGE”..
2. Press CHANGE to confirm the current status (on or off) is also displayed on the message window..
3. | Press CHANGE again to change the setting.. |
4. | Press SETUP to save and advance to the next menu option or press |
| PLAY/STOP / to save and exit.. |
When the message alert function is on, the base unit beeps every 10 seconds.. PLAY/STOP 
/ 
and the number of messages in the message window flash when there are new messages. PLAY/STOP 
/
and the number in the message window are on steadily to indicate there are no new messages..
Announcement only mode
In announcement only mode, callers hear an announcement but cannot leave messages.. When announcement only is turned on, calls are answered with the
Turn the announcement only mode off or on
•Press SETUP four times until you hear “Announcement only. Record no messages. To change the setting, press CHANGE.”
•Press CHANGE until you hear the option you want (on or off)..
•Press PLAY/STOP 
/ 
to save and exit..
36 | www.vtechphones.com |