Motorola 68P81083C10-C manual Caller ID, Mode Preset Buttons, Mode Recall, Automatic Power-Off

English	page 10
MCS 2000 Models II & III	68P81083C10-C

Keypad Selection:

(model III or model II with optional keypad micro- phone)

Press the call button (12) or select PRIVATE CALL through the menus and enter the desired ID directly from the keypad.

If an incorrect number is entered the digits may be erased by using the mode selector (D) to the left/ down. Continue using the mode (D) to the left/down to erase the entire ID. Then enter the correct ID.

When the ID has been selected in one of the two ways described above, the private call may be transmitted to the displayed ID by pressing the PTT (F).

Enhanced Private Call

If an Enhanced Private Call is not answered within 20 seconds the display changes into

model III	model II
NO ANSWER	NO ANSWER
ID: 700001

Press the PTT (F) to leave your ID with the called radio so that you will be called back later. The call alert sent tone will sound.

Caller ID

The radio will momentarily display the ID or alias name of the radio that initiated a call. If an emergency call is received in trunked operation, the radio will alternate the display between the talkgroup, the emergency received display and the ID (or alias name) of the radio that initiated the emergency call.

Mode Preset Buttons

Mode preset buttons will allow quick access to com- monly used modes. Press and hold a mode preset button until a good-key tone is heard to program the button for the currently selected mode. A short press of a mode preset button will cause the radio to imme- diately change to the mode programmed for that but- ton.

Mode Recall

The radio will always remember the last mode selected. Pressing mode recall will cause the radio to switch to the previously selected mode.

Note: The “last” mode must be selected for a mini- mum of 5 seconds to be retained as the “last” mode.

Automatic Power-Off

“Automatic power off” will power off your radio when