Motorola 68P81083C10-C manual Function Selection, Function Button Selection, Menu Selection

English	page 4
MCS 2000 Models II & III	68P81083C10-C

Depending on programming, if the ignition is turned off, the radio will:

•turn off

•inhibit transmit capability, or

•inhibit the use of the PTT button.

Contact your system operator for further information. Turn the radio off by pressing the on/off button (A) again.

Note: If the radio sounds the error tone and dis- plays an error message, please contact the per- son in charge of your radio system or your local service representative.

Function Selection

Functions programmed into the radio can be selected in two different ways:

1Directly via a pre-programmed, dedicated but- ton, or

2Indirectly via the radio MENU.

Function Button Selection

For direct access to a feature, depress the desired function button.

A triangle in the display points to the function button used.

If the function requires additional input, use the mode selector (D) to display your choices, and press the select button (13).

Note: Function buttons are usually active. Pressing a function button will exit the current feature and start the selected feature.

Menu Selection

Features may be accessed indirectly through the radio menu.

1Press the menu button (9) to enter menu selec- tion.

2Use the mode selector (D) to display the desired function.

3Press the select button (13). The radio will leave menu mode and enter the selected feature, or enter a sub-menu.