_ indicates your phone is in vibrate mode. _ indicates you have new text messages.
_ indicates you have voicemail messages. Press and hold to call your voicemail box. _ indicates you have new text and voice messages.
_ indicates your phone’s location feature is enabled. When Location is “Off,” appears on the display screen. _ shows your current battery charge strength.
(Icon is shown fully charged.)
Tip: Display indicators let you know when you’re off the enhanced STi Mobile Coverage Area.
Features of Your STi Mobile LG® 1200
Congratulations on the purchase of your STi Mobile LG® 1200. This phone is lightweight,
_ The
_ One hundred
_ Speed dialing lets you dial phone numbers by pressing one or two digits (page 25). _
_ More than a dozen preprogrammed ringers let you personalize your phone (page 31).
Turning Your Phone ON and OFF
Turning Your Phone ON
To turn your phone on, press END/PWR for approximately two seconds.
Once your phone is ON, it displays “Searching for Service” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode – the phone’s idle state. At this point, you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for STi Mobile service by pressing any key (when your phone is turned ON).
Tip: The Power Save feature helps to conserve your battery power when you are in an area where there is no signal.
Turning Your Phone OFF
Press and hold END/PWR until you see the powering down message and animation (for example, “LG Goodbye!”) on the display screen. Your screen remains blank while your phone is off (unless the battery is charging).
Using the Battery
Battery Capacity
Your STi Mobile phone is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your battery before it is fully drained. The battery provides approximately 2.5 hours of continuous digital talk time or approximately [48] hours of continuous digital standby time. When there are approximately two minutes of talk time left, the phone sounds an audible alert and then powers down.
Note: Long backlight settings, searching for service, vibrate mode and browser use affect the battery’s talk and standby times.
Tip: Be sure to watch your phone’s battery level indicator and charge the battery before it runs out of power.
Installing the Battery
Your STi Mobile phone comes with a LiIon battery. Follow these steps to install it:
1.Place the battery in the opening at the back of the phone at a
2.Gently press down on the battery until the latch snaps into place.
Removing the Battery
To remove your battery, follow these easy steps:
1.Make sure the power is off so that you don’t lose any stored numbers or messages.
3