Set up UPnP access on a Windows PC - cont.
4.Touch SharedMedia.The radio will scan for all available UPnPservers. It may take a few seconds for the radio to complete its scan. The radio will display 'No UPnP service' if no UPnP servers are found.
5.After scanning, select your UPnP server. If you allowed automatic connection previously, your radio should now connect and you may skip to the next page.
If you did not permit automatic connections, your radio willthen normally display 'Unauthorised' at this stage.
6.Your PC may prompt you that there has been a connection to your UPnP server. Whether prompted or not, in order that the radio may access the music fi les, you will need to click the 'Library' tab in WMP 12 and select the 'Stream…' item to open the 'Media Streaming' window. Select 'Automatically allow devices to play my media' then select 'Automatically allow all computer and media devices'.
Alternatively select 'More Streaming options' to enable sharing on a 'per device' basis.
7.In the 'More streaming options' window, the radio will be listed as a blocked device. Click on the button shown to select 'Allowed'.
Note: If you are using Microsoft Windows' fi rewall software, this should be correctly confi gured by WMP 12. If you are using third party fi rewall software you may need to manually confi gure it to allow your unit and WMP 12 to communicate (see the 'Troubleshooting' section on page 87).
8.On the radio, select the named server again. If WMP 12 is now able to communicate with your radio you will be presented with some media selection options on the display.
Music Player
15:05 26 Jun 2010
Select Music Source
Shared Media
USB Playback
My Playlist
15:05 | 26 Jun 2010 |
Shared Media | |
JENNY: Jenny’s music | |
| My Music |
HOME_PC: Mums music | |
<Rescan> | |
| My Music |
Allowing a device to connect to Windows Media Player 12
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 34 |