Auxiliary input socket
A 3.5mm Auxiliary Input socket located on the rear of your radio is provided for connecting the audio signal from an external audio source such as an MP3 or CD player.
Connect a stereo lead from the headphone output of your MP3 or CD player to the Aux In socket located at the rear of the radio. Typically this lead will have a 3.5mm stereo plug at both ends.
Switch on your radio.
From the home menu press the Aux mode button
AUX
Press 'play' on the connected audio device. If you are using its headphone output for the connection, set its volume control to a level of somewhere between
Note, if using an iPod as the sound source, you may need to set its output to maximum to get an adequate audio signal level.
After use, disconnect your player in order to listen to your radio conventionally.
Display and Audio
15:05 26 Jun 2010
Auxiliary input
Aux In
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 82 |