Pantech C120 Transferring a call, Multi‐party calls, To switch between two calls, To end a call

Options during a call

up in Address Book entry.

❷Press the [s] key to dial the second call. The first call is automatically put on hold.

To switch between two calls

Press the [Swap] Soft key. The current call is put on hold and the held call is reactivated so that you can continue your conversation with the caller.

To end a call

Press the [s] key in the normal way. To terminate all active calls at the same time while you are in multi-party call, select [Options] and then select [End All Calls].

Transferring a call

You can transfer or connect the current call to the held call if your network service provider supports this service, so that callers can talk to each other.

You will be disconnected from both of them.

❶During a call, make or answer a call in the normal way then press the [Options] Soft key.

❷Push the joystick Up [u] or Down [d] to highlight the [Transfer] option then press the [Select] Soft key or push in on joystick.

30

060613_C120_EN_REV01.indd 30

The two callers will be connected to each other.

Multi‐party calls

A multi-party call feature is a network service that allows up to six people to take part in a multi-party or conference call simultaneously. For further details, contact your service provider.

To make a multi‐party call

❶Call the first participant in the normal way.

❷Call the second participant in the normal way. The first call is automatically put on hold.

❸To join the first participant to a multi-party call, press the [Options] Soft key then select the [Join All] option.

❹Push in on joystick.

To add a new person to a multi‐party call

❶Call the person in the normal way.

❷Press the [Options] Soft key then select the [Join All] option.

❸Push in on joystick.

2006.6.13 4:56:47 PM