Pantech C120 manual Security, Time & Date, Flight Mode, PIN1 Check, Settings

Press the [Menu] Soft key, select 9.Settings, select 4.Phone, and then select 1.Language to select a language for the display.

NOTE Select Automatic to set the language as English.

Time & Date

This function allows you to set the time and date displayed on your phone.

Press the [Menu] Soft key, select 9.Settings, select 4.Phone, and then select 2.Time & Date.

You can set up Time, Time Format and Date, and Date Format by pushing in on joystick.

If you select On for Automatic, the time and date are updated automatically.

Flight Mode

Press the [Menu] Soft key, select 9.Settings, select 4.Phone, and then select 3.Flight Mode.

After you select Flight Mode On, you cannot call or receive calls. This mode enables you to cut off the radio session but maintains power to other ancillary functions such as the calendar, games, and other features. This mode supports use of these features in environments where transmitters or receivers are not allowed, such as on an airplane. If you

060613_C120_EN_REV01.indd 79

Settings

select Flight Mode Off, your phone reboots.

Security

The security settings enable you to restrict the use of your phone to specific people and types of calls.

Codes and passwords are used to protect these features of your phone.

They are described in the following sections. See also 2.Access codes in the Appendix, on page 86.

The security settings enable you to restrict the use of your phone to specific people and types of calls.

Your phone’s security features keep your phone and SIM card safe from unauthorized use. You can either set a password for your phone or use the Call Barring service and Fixed Dialing mode to restrict which calls can be made using your phone.

Press the [Menu] Soft key, select 9.Settings, and then select 5.Security.

PIN1 Check
Push the joystick Left [l] or Right [r] and push in on
joystick for setup. If you input the incorrect PIN1 code three
consecutive times, you will be prompted to input the PUK1
number. The default is disabled.	79
2006.6.13 4:57:2 PM