Pantech C120 manual Messaging, For further details, see Graphics on page

Messaging

•Bcc (Blind carbon copy): Send the message to the third party but does not notify the other recipient.

❷When [No Subject] page displays, press the [Add] Soft key ([]]) to add an objects.

•Add Text: Add a new text.

•Add Image: Add the photo or the downloaded image. push in on joystick to select the sub-menu.

•Take a Photo: Create a new photo.

•Photo Album: Already saved photo.

•Downloaded: Downloaded image.

(For further details, see Graphics on page 63.)

•Add Sound: Add the voice memo or the downloaded sound. Push in on joystick to select the sub-menu.

•New Voice Memo: Create a new recording memo.

•Voice Memo: Already recorded sound.

•Downloaded: Downloaded sound.

(For further details, see Audio on page 63 and Voice Memo on page 68.)

•Add Slide: Add a new slide.

NOTE After you add the text, the image or the sound, the Add Slide menu appears if you press the [Add] Soft key ([]]). To move

44to a different slide, push the joystick Left [l] or Right [r].

060613_C120_EN_REV01.indd 44

❸After writing the message, push in on joystick. And then press the [Options] Soft key ([[]) to use the following [Editor Options].

•Preview: Shows the message as it appears on the recipient’s phone, and you can return to the Editor to press the [Editor] soft key ([[]).

•Delete Text/Image/Sound/Slide: Delete the selected text, image, sound or slide from the slide page.

•Add Objects: Add an image, sound, and slide objects.

•Save as Draft: Save messages in the phone memory.

•Delete Slide: Delete the selected slide.

NOTE When more than one slide exists, this menu appears.

•Edit Subject: Edit the subject.

•Settings: The user can only change the setting for the message which is in the process of being written regardless of the global settings.

•Slide Timing: Set how long the received message is displayed. The display automatically scrolls to the next slide page after the specified time.

•Page Layout: Arrange the image and text display position in the slide page. You can set Image at Top or Text at Top.

2006.6.13 4:56:53 PM