Pantech C120 manual Camera, Take a Photo, Taking photos

This function enables you to take a photo in various ways using the built-in camera. The photo can be saved and sent with a multimedia message.

Take a Photo

Taking photos

❶Press the [Menu] Soft key, 6.Camera, and then select 1.Take a Photo to enter your phone’s photo capture mode.

Tip You can also press the [Camera] Soft key ([]]) on the idle screen to take photo. At this time, the image size depends on the user setting.

❷To change the photo shooting mode, press the Right Soft key ([]]). This toggles between the following options, represented by icons on your phone’s display.

	Shooting Mode	Icon		Description
	Single Capture			General mode for a single photo.
				Takes multiple photos. The quantity
	Multi Capture			of photos is determined by the
				[Multi-shot] option.
	Frame Capture			Takes a photo with a built-in frame.
				The image size is fixed as 128X128.
060613_C120_EN_REV01.indd			59

Camera

NOTE The default image size is 640X480 mode. You cannot set Frame in 640X480 size.

❸Push the joystick Up [u] or Down [d] to zoom in/out of the image in the current preview when the image size is 128X128. And push the joystick Left [l] or Right [r] to control the seven levels of brightness.

❹The phone saves the image automatically when the user pushes in on joystick. Press the [c] key to return to the camera preview screen.

NOTE In Multi Capture mode, the photo can be named automatically only if one photo is set as Marked. Select [Mark] or [Unmark] to check the image that you want to save.

Tip If you are taking photos, you can use the following keys to adjust your phone’s camera directly.

Function	Description	Key
Brightness	7 levels (from 0 to 6)	Push the joystick
		Left [l] or Right [r]
	Change the zoom levels	Push the joystick
Zoom	(4 level, only available in
		Up [u] or Down [d]
	128x128 size).

59

2006.6.13 4:56:57 PM