Pantech C120 manual Key Tone, Sound Effects, Call Forward, Settings

Settings

Every 5 Mins.

•Ring Volume: Control the volume in eight levels.

•Sound: Specify the Message Alert Tone. Push the joystick Left [l] or Right [r] to set Message Alert Tone to Bell1, Bell2, Bell3.

Key Tone

This function allows you to select the sound you hear when you press your phone’s keys.

Press the [Menu] Soft key, select 9.Settings, select 2.Audio, and then select 5.Key Tone.

You can personalize the following.

•Tone Type: Specify whether key tones are turned on or off.

•Sound: Specify the key tone sound to Beep, DTMF, or Bell 1~3.

Sound Effects

This function allows you to turn the default sound effect on or off for various events.

Press the [Menu] Soft key, select 9.Settings, select 2.Audio, and then select 6.Sound Effects.

Press the [Mark] Soft key, and then push in on joystick to

76

060613_C120_EN_REV01.indd 76

save the effect.

•WAP Connection: When you connect or end a WAP session.

•Minute Minder: Every minute while making a phone call.

•Call Connection: When you dial or hang up.

Call

Call Settings define how your phone reacts when you receive a call or a message, and specifies how calls are to be answered on your phone.

Press the [Menu] Soft key, select 9.Settings, and then select 3.Call.

Call Forward

This function allows you to divert incoming calls to another phone number.

Press the [Menu] Soft key, select 9.Settings, select 3.Call, and then select 1.Call Forward.

Choose Forward Always, When Busy, On No Answer, When not Found, or Cancel All, all of which divert the call as required.

Because call forwarding is a network service, you must contact Cingular to verify the availability of the service.

2006.6.13 4:57:1 PM