HTC SM-TP001-0704 service manual Main unit inspection, Cosmetic inspection generic spec

Page 75

HTC Corporation

.

Doc. Title

Blackstone Service Manual

Doc. No.

Issued Date

Revised Date

Page

DOC-00045694 REV.

2008/8/21

A01

2008/11/6

75 of 96

6.3 Main unit inspection

Cosmetic inspection generic spec.:

1.Exposure of substratum is not acceptable for peeling. (Area 4 is included)If not exposure of substratum, please check by SPEC of dot or scratch. (Area 4 is not included)

2.Logo may not have blurred or double print., the peeling on logo is not acceptable.

3.The character printing of main unit does not allow bad printing, scratch, dirty,

lacquered peeling, dark/white dot on it)

4 .Camera Lens: Contamination dot / foreign matter

D0.25mm, S3mmLint: L1.5mm , W0.2mm

5.Accessories include Cradle; please follow Class B for inspection.

6.Main unit cosmetic inspection criteria of class D, please follow dummy class C for inspection criteria.

GAP & STEP INSPECTIONS

Description

Accept criteria

Level

Status of main unit assembly

Defective assembly and deformed shape were not

Minor

allowed

 

 

Gap between each key and ME

Can’t stuck up or no click feeling, It couldn’t

Minor

parts

allow stuck up at pressing process

 

Gap between all generic ME

Gap between all generic ME parts < 0.3 mm

Minor

parts

 

 

Gap between Touch Window and

Gap between Touch Window and A parts

Minor

A parts

< 0.35 mm

 

Stylus

Stylus assembly protruding, loose, missing, falling

Minor

and deformed are not allowed

 

 

Step between mating parts

Step between all generic ME parts < 0.2 mm.

Minor

Reverse step do not accept

 

 

The inspective point of D area:

1.Any marks generated by scratching, grinding or colliding are acceptable except base material exposed

2.Not allow battery connector deform. The hook of battery cover also can’t allow broken and deform

HTC CONFIDENTIAL

SM-TP001-0704

Image 75
Contents Blackstone Revision Control Table REV Date Contents Dept Revised Stage HTC Corporation Introduction Product Features HTC Corporation HTC Corporation HTC Corporation HTC Corporation Product overview HTC Corporation HTC Corporation HTC Corporation To remove the Battery cover To install / remove the battery To perform a soft reset Tools list Device Disassembling and Assembling ProcedureDisassembling procedure Tool Phillips screw-driver 72H02916-00M Torque 0.7±0.1kgf-cm HTC Corporation HTC Corporation Torque 0.7±0.1kgf-cm Remove the Power FPC as shown Torque 0.7±0.1kgf-cm HTC Corporation Board HTC Corporation Disassembly Completed Assembling procedure HTC Corporation HTC Corporation HTC Corporation HTC Corporation HTC Corporation HTC Corporation HTC Corporation HTC Corporation HTC Corporation HTC Corporation Fasten the screws at location indicated HTC Corporation HTC Corporation Download OS Image from SDO ROM Re-flash ProcedureROM upgrade thru RUU Re-flash Upgrade Utility Connect device to PCRUU-1 Check the setting of menuRUU-4 RUUOS upgrade is finished, click Finish to close the utility Format SD card and copy image file to SD card ROM Image upgrade thru SD cardSD Upgrade List of Diagnostic Test Items Diagnostic ProgramHTC Corporation Test Procedure Diagnostic Main Menu/Function Test MenuAuto Test Back Light Test T1 TestSdram Test SD card TestKey Test Display Test and RED/ Green pattern Display Test BLUE/ Black patternDisplay Test WHITE/Color bar pattern Touch Panel Test Vibrator TestLED Test Read Battery info Stylus Detect TestLight Sensor Test CPU Identify ROM Checksum TestSensor Test WinCE Test Bluetooth TestBluetooth Test-2 Bluetooth Test-3Camera Test USB TestWlan Test GPS TestFM Radio Test Audio Test-1 Audio Test-2Audio Test-3 Audio Test-4 Audio Test-5Audio Test-6 Equipment list Control boxTypes Jig Equipment set up Idle current test Start testingSleep current test Battery rundown test procedure Copy the Battery Rundown tool into the deviceTest Requirement Battery Rundown-2 Battery Rundown-1Battery Rundown-3 Battery Rundown-5 Battery Rundown-4Battery Rundown-6 Please replace a new batteryClasses definition of inspective area Cosmetic Inspection CriteriaClass C Class D Display inspection Cosmetic inspection generic spec Main unit inspectionBright mark ScratchBurr….etc Imprint markLint .Main Unit Does Not Respond to Power Button Generic Troubleshooting.Unusual Vertical / Horizontal lines or partial display .PC Connection not possible 10.Battery Pack does not recharge 13.Wireless connection WLAN/BT not functioning „ Agency labelBLAC100 Generic Labeling Plan „ Main unit„ Agency labelBLAC110 „ Agency labelBLAC120 „ SIM sticker SPL for Repair Generic Spare Part List and PhotosHTC Corporation HTC Corporation HTC Corporation HTC Corporation Board Level 2.5 Repairs „ Basic Repair Instructions for Component ReplacementNumber Description Remark ¾ Main Board 51H40487-XXMLocation Number Description Remark Eirp RF Antenna Specification≧18 dBm
Related manuals
Manual 98 pages 61.92 Kb