Falcon 4400 manual Powering the Falcon, Battery Pack

Powering the Falcon

Feature	Function/Description	More
		Information
	Use the stylus for navigation and to select items on the touch screen, and to	Figure 14,
Stylus	select characters on the on-screen keyboard. Place the stylus in the holder
	after use so you don’t lose or misplace it. An optional Stylus Tether is avail-	page 21
	able for both models.

Powering the Falcon

Battery Pack

The battery pack in the Falcon is a 3.7 V, Lith- ium Ion battery pack. You will be alerted with a message dialog box when the battery pack reaches a low state.

After charging the first time, a complete charge takes about four (4) hours depending on the bat- tery pack’s state and the recharging method. A sample battery pack label is shown at the right.

3.7V

Product of USA

Li-ion	2000mAh
		U	S

5-1764

CAUTION: Battery can explode, leak or catch fire if exposed to high temperature, water or fire. Do not short circuit, open or disassemble battery. Recycle or dispose of properly.

You must charge the battery pack and backup battery in a dock or with a power cable prior to your first use of the Falcon. The initial charge time is approximately 24 hours.

If you remove the battery pack or it fails, there is a 30 minute window in which to

CAUTION insert a charged battery pack before the backup battery fails. If your backup bat- tery fails, the contents of the RAM memory will be lost. If your backup battery is less than fully charged, there is a proportionally smaller window of time available to replace the main battery. Usage time will also be reduced.

Always charge the battery pack within the temperature range of 32°–113°F (0°– 45°C).

Use only the authorized power supplies, battery packs, chargers, and docks sup- plied by your PSC reseller. The use of any other power supplies can damage the Falcon and void your warranty. Refer to the PRG for the correct power supplies and Accessories.

Quick Reference Guide 9