Falcon 4400 manual Tery pack charging has Do the following

Page 47

			Troubleshooting


Problem	Possible Cause		Solution

The Spare Battery LED on	Time-out fault: the spare bat-	In either case, if the Spare Battery LED is flashing red,
the dock is flashing RED.	tery pack charging has	do the following:
	exceeded the maximum time-	1.	Disconnect the AC adapter from the dock.
	out period.	2. Remove the spare battery pack and the Falcon from
	Over-voltage fault: the spare		the dock.
	battery pack charging has	3.	Connect the AC adapter to the dock.
	exceeded the maximum charge	4.	If the Spare Battery LED is flashing red, there is a
	voltage of the battery.		problem with the dock. Disconnect the AC adapter
			from the dock and contact a service technician.
		5.	If the Spare Battery LED is off, insert a different
			spare battery pack in the dock.
		6.	If, in the course of charging the spare battery, the
			Spare Battery LED is flashing red, there is a problem
			with the dock. Disconnect the AC adapter from the
			dock and contact a service technician.
		7.	Otherwise, there is a problem with the first spare
			battery pack. Discontinue use of the first spare bat-
			tery pack. Refer to the PRG for instructions on bat-
			tery disposal.

Quick Reference Guide

45

Image 47

Contents Key model Falcon 4400 SeriesPatents PSC IncDisclaimer Table of Contents Appendix E Laser Safety Overview Falcon 4400 SeriesMinimum Desktop Computer Requirements Connecting to a PCGetting Started System RequirementsConnecting your Falcon to a PC Installing ActiveSyncFalcon Key Keypad Handled model Features of the FalconFalcon Scanner and Battery Door Views Feature Function/Description More Features of the FalconBattery Pack Powering the FalconInstalling the Battery Pack Installing the Battery Pack Checking Battery Power Battery Status Indicators Charging the Batteries Battery Power GaugeDock or Charger Falcon Charge LEDTop/Rear View of Single-Slot Dock Charging with the DockBattery Status Display Backup BatteryBattery Discharge Characteristics Setting Up the Mobile ComputerCharging with a Battery Charger Touchscreen Calibration Entering a PasswordEntering Data Radio Card SetupBack View of a Falcon 4420 with a Stylus Using the StylusToday Screen Navigating the DisplaySoft key bar Start Menu Start MenuKeyboard Icon SettingsOn-Screen Keyboard Programs Settings screenKey Name Keypad Function/Description KeypadsOverview Keyboard Indicators Modes are not on Press Fn to enter FN modeIcon FunctionKey Keypad Key KeypadNormal Alpha Mode Key Functions Keypad KeypadLaser Scanning Scanning Bar CodesLaser Beam Positions Laser Bar Code Scanning with 2D ImagerScanning Differences Aiming Beam Positioning Scanning IlluminationOCR Scanning Accessing HelpImage Capture PSC recommends using a straightened paper clip Resetting the FalconWarm Reset Procedure to Warm ResetAfter Warm Reset Hard ResetHard Reset Key Sequence After Hard ResetClean Boot After Clean Boot Hold Power & press Reset ... then press ESC +On the display TroubleshootingProblem Possible Cause Solution Did not chargeIncomplete Problem Possible Cause Solution During dataWas transmitted, or Transmitted data wasTery pack charging has Do the following Start RF Connectivity TroubleshootingTelephone Technical Support Technical SupportPSC Website Support PSC Website TekForum Reseller Technical SupportFalcon 4400 Series with Windows Mobile General Eula Terms and Conditions Transfers, Support Limitation Of Liability Appendix B. Microsoft Windows Mobile Addendum to Eula Software END Appendix C PSC Falcon Windows Mobile Product Series Warranty Radio Frequency Interference Canadian Compliance Statement Laser Safety LabelRegulatory Statements Advisory StatementFrench EnglishItalian GermanSwedish DanishDutch Norwegian FinnishSpanish PortugueseChinese Japanese Page Appendix E Laser Safety Declaration of Conformity Germany United Kingdom Asia Pacific ItalyAustralia Japan France Latin America