Basic Operations
Making a Telephone Call
1.Press TALK, wait for dial tone, and then enter phone number.
2.Alternatively, you can enter phone number first then press TALK key. When using this method to dial out, you can use the Clear (Left) and Delete (Right) soft keys to edit the number entered. “Delete” erases the last digit entered. “Clear” erases the entire line but remains in the dialing mode.
3.To abort dialing, press END key.
Notes:
1.The Base Station will automatically search for an available line and dial out. If Line Selection option has been enabled, the handset will be prompted to select from a list of available lines.
2.If all 4 lines are occupied, including if some lines are made unavailable to all handsets (lines can be dedicated to only certain handsets, see Auto- Attendant Operations), the LCD shows “No Line Available” and handset returns to standby mode.
3.If a link cannot be established, the LCD will show “No Base” after a
4.A call duration timer will start displaying the length of the call after link is established (regardless if and when the call is answered).
Making an Intercom Call
1.Press Intercom key followed by a
31
2. To abort dialing, press END key.
Notes:
1.Intercom calls can be made regardless if the Base Station is present.
2.If a Group ID is entered, the first handset (belonging to that group) that answers will establish a link with the caller. See Handset Group Subscription.
3.If a link cannot be established, the LCD shows “No Connection” after a
Redial
1.Press REDIAL (Left) soft key.
2.The LCD shows the last phone number dialed. To dial this number, press DIAL (Left) soft key.
3.Use Up or Down Arrow Key to scroll through the last 10 phone numbers dialed. Select and press DIAL soft key.
Notes: Intercom numbers (Handset ID) are not stored in 
the last 10 numbers dialed log.
Receiving a Telephone Call
1.When an incoming call arrives, the ringer will ring or vibrate unless the ringer has been turned off.
2.If the handset is on the charger cradle (ringer will be temporarily switched to “Ring” if it has been set to “Vibrate”), lift the handset and start conversation.
3.If the handset is not on the cradle, press any key (except PWR, END, and the Silent soft key) to answer.
Notes:
32